Mañolo

New Sideloader V

I'm almost finished with new Sideloader V version.

It uses all of the electronics from Vufine glasses, just like the previous one.

I also plan to sell a complete device on Etsy as one time offer type of deal.

Raspberry Pi Zero v1.3 Layer Scans

I'm doing full teardown of the Raspberry Pi Zero v1.3.

I'm going to make the gerber files for it as well but I doubt it's possible to assemble this at home. The main chip is actually two, BGA chips stacked on top of each other and it honestly looks like nightmare to solder.

FLCoS Engine 2.0 | STL Files

Brand-new version of my FLCoS Engine.

Now features super-sleek, resin frame, real sunglasses lense and simple resin cover.

FLCoS Engine 2.0 | CAD Files

Brand-new version of my FLCoS Engine.

Now features super-sleek, resin frame, real sunglasses lense and simple resin cover.

Hub layers finished

I’ve finished scanning all of the layers for the new USB-C board.

Now I can start making the gerber files and order some prototypes

New AR mainboard coming

I've bought 2 sets of new type of USB-C dock for prototyping a new kind of AR motherboard for my devices.

This one has a HDMI port (for the FLCoS/ECX display) and a lot of USB ports.

This basically means that if I'm able to reverse-engineer it and make my own version, I could make a board that would drive the ECX/FLCoS display, integrate the SteamVR controller PCB and I would have s...

Viture Pro Teardown

Hey everyone

I've bought the Viture Pro glasses for super cheap since they were destroyed by the previous owner.

I've recorded the short teardown video (not sure I will upload it)

I can confirm though that those glasses use ECX348E display from Sony and the birdbath modules are super easy to take out and be re-purposed.

If you can buy those glasses and know how to make ...

Soon

New „Engine” thingy coming out soon.

Super excited about this one 🤞🏻

Dual piece frame

Double piece frame for easier assembly, better hidden electronics and easier FFC installation.

Nicer color combinations as well 👌🏻

Onyx 1.5 HDMI Upgrade | CAD Files

I've designed a HDMI upgrade for my Onyx 1.5 glasses.

You can now replace the 3.5mm video jack with something better :)

Onyx 1.5 HDMI Upgrade | STL Files

I've designed a HDMI upgrade for my Onyx 1.5 glasses.

You can now replace the 3.5mm video jack with something better :)

Mini HDMI Converter 0.4 | 3D STEP File

3D STEP file for my Mini HDMI Converter 0.4.

I've needed this to design the HDMI upgrade for Onyx 1.5.

Maybe you can use it as well :)

DaVinci Nano 3D Scans - Work in progress

I'm currently 3D scanning each and all plastic parts of the XYZ DaVinci Nano 3D printer. This is work in progress, more files will be added later on.

Done :

• Front Door

• Top Cover

• Base

• Electronics Cover

• Tophat

• Main Housing

• Glass Plate

ECX HDMI 0.14 | Production Files

My version of the HDMI driver board for the ECX333.

Tested, works :)

Mini HDMI Converter 0.4 | Gerber Files

My smallest to date, HDMI converter for any kind of display that uses composite video.

I've tested it out. It works :)

Rokid MAX 3D Scans - Work in progress

I'm currently 3D scanning each and all plastic parts of the Rokid Max AR glasses. This is work in progress, more files will be added later on.

Done :

• Lens Cover

• Combiner, magnifier and reflector

• Front Frame

Super Slim FLCoS

My super-slim FLCoS driver boards arrived today!

6 layers, super precise. I’ve designed them to be as tightly packed as possible, for super slim AR devices.

I hope it will work 🤞🏻

Mini HDMI Converter 0.32 | Gerber Files

My classic Mini HDMI converter.

Now with updated board outline, easier to solder output pads and updated component footprints.

nRF24L01 0.1 | Gerber Files

Very first version of the nRF24L01 module PCB.

It's a full re-creation of the original board

FLCoS Driver Board 0.2 | Gerber Files

Newest version of my FLCoS driver board.

Fully functional. Built-in micro HDMI Converter.

Micro HDMI Converter 0.12 | Gerber Files

My newest HDMI converter with Micro HDMI connector and additional micro USB for more power.

Now it shouldn't get hot while working.

Updated the board a little. Fixed some minor mistakes near the HDMI connector and made the USB port further away from HDMI so that cables with thicker plugs won't have issue going inside.

USB-C dock speedrun

I’m speedrunning the USB-C hub PCB design.

It might not seem super-related to what I usually do at first, but this will be used to create the all-in-one AR PCB motherboard.

Imagine board which has all of the required stuff in it - FLCoS driver, HDMI converter and Gyro core board. All in one PCB.

All of this will be of course plugged in via USB-C cable which will deliver all ...

Micro HDMI Converter 0.11 | Gerber Files

My newest HDMI converter with Micro HDMI connector and additional micro USB for more power.

Now it shouldn't get hot while working.

I haven't tested it yet since I don't have micro hdmi cable at the moment but it should work fine.

USB-C Dock 0.12 | Gerber Files [Semi-working]

More refined version of the gerber files for the USB-C dock from Aliexpress.

I've basically re-created the board from images.

It has all of the traces and components of the original board.

Tested by me. HDMI and USB 3.0 plug works. Converts HDMI to USB-C no problem.

USB-C (bottom left) doesn't work.

USB-C Dock 0.11 | Gerber Files [Semi-working]

More refined version of the gerber files for the USB-C dock from Aliexpress.

I've basically re-created the board from images.

It has all of the traces and components of the original board.

Tested by me. HDMI and USB 3.0 plug works. Converts HDMI to USB-C no problem.

USB-C (bottom left) doesn't work.

Sideloader ECX 1.0 | CAD Files

Brand-new Sideloader for ECX331 OLED displays.

Horizontal orientation with built-in SteamVR via new AiO Gyro Core with HadesVR software.

Sideloader ECX 1.0 | STL Files

Brand-new Sideloader for ECX331 OLED displays.

Horizontal orientation with built-in SteamVR via new AiO Gyro Core with HadesVR software.

Files include 2 Halo versions, one for multi-color and one for single-color.

USB-C Dock 0.1 | Gerber Files [Untested]

The very early version of the gerber files for the USB-C dock from Aliexpress.

I've basically re-created the board from images.

It has all of the traces and components of the original board.

Not tested yet.

Micro HDMI Converter 0.1 | Gerber Files [untested]

My newest HDMI converter with Micro HDMI connector and additional micro USB for more power.

Now it shouldn't get hot while working.

Haven't had time to test it out but it should work since I've just changed the connector for smaller one.

Gyro Core - All-in-One | Gerber Files

This is my newest version of the Gyro core board.

It has built-in controller and MPU.

This is basically all you need for SteamVR apart from display.