Hey friends,
The first model of the month has just been released! Welcome Baobhan, sculpted by our guest artist Ukupalua. It was a real pleasure to work with the artist and I hope we'll have a chance to do so again one day!
By the way, this model is the second tallest figure we've made so far, beaten only by Sailor M...
2023-09-22 19:51:54 +0000 UTC View PostUPDATE: Only a bit over 3 hours left, make sure to place or review your votes before the poll is closed!
Hey friends,
The dust has barely settled on the last poll, and we are now launching a new one. Elena has almost finished her current Doroherodo model and is looking fo...
Hey friends!
Moving on to share the last test print we made in August - Bulka Crustreaper, our new 4 months loyalty reward. Our artist Elena even took a small break from her vacation to paint this model a little bit.
Printed on Elegoo Saturn 2 using the following resin:
Hey friends,
I'm continuing to share our last month's test prints. Now it's time for Byleth from Fire Emblem: Three Houses.
Printed on Elegoo Saturn 2 using the following resin:
Enjoy!
Des...
Hey friends,
We continue to clear out our backlog by presenting the next test print, Velvet Crowe from Tales of Bersesia.
Printed on Elegoo Saturn 2 using the followin resin:
Enjoy!
Des
Hey friends,
Better late than never, so over the next couple days I'll be sharing our last month's test prints that have been sitting on my desk the entire time. We'll begin with Miku!
Enjoy!
Des
Hey friends!
We know it's only been a week since the last poll, but it's time already to submit your character suggestions for November, as per our new release schedule!
The suggestions will be collected until Wednesday, September 20th. This time, Elena (a.k.a.Bulka Sensei) is in charge of sculpting the poll winner, which also means she w...
2023-09-16 18:15:26 +0000 UTC View Post
Hey friends,
As part of our new release schedule, we are ready to announce October models earlier than usual.
Haru (Dorohedoro), TBD October 5th. Elena has returned from her two months long vacation a couple weeks ago and has been working on that model ever since. Being a huge Dorohedoro fan, it's a personal project that she originally wanted to release for Hallowee...
2023-09-11 14:00:06 +0000 UTC View Post
Hey friends,
For those of you who don't visit our Discord server too often, we have prepared this post to show what our guest artists have been up to recently.
And in case you need the reminder, here is what we are planning to deliver for you this month:
Hey friends!
Our team is immensely proud to present our first original character, Bulka Crustreaper!
This model supersedes Megumin as our 4-months Loyalty Reward and will be available from now on until we replace it with a new model in January 2024.
The download link will be shared shortly to all eligible subscribers via MyMiniFactory, so make sure you check your em...
2023-09-07 14:47:49 +0000 UTC View Post
Hey friends,
This month, we continue to introduce you to various 3D artists by offering a new guest model, Poison Ivy by Abe3D.
Leandro, the proprietor of Abe3D studio, has been in the 3D sculpting industry for a very long time. He primarily focuses on fanart female character models in 1/4 and 1/6 scale. Suffice it to say, his models speak much better of his skills than I...
2023-09-06 17:47:05 +0000 UTC View Post
UPDATE: Only 12 hours left before the poll is closed. Make sure to place/review your votes before then!
Hey friends,
The voting season has come!
As I mentioned in an earlier post, we have slightly changed our approach in picking the poll options from your suggestions...
2023-09-05 19:50:46 +0000 UTC View Post
Hey friends,
We are continuing to clear our August backlog with this release of Byleth, sculpted by our guest artist Jeoffrey Arcilla specifically for Bulkamancer Sculpts, split and pre-supported by our team!
The model has already been uploaded to 2023-09-04 14:01:12 +0000 UTC View Post
Hey friends,
We are slowly taking care of our late August releases, and this time we are happy to announce the completion of Miku! She's been thoroughly tested and printed already, so there shouldn't be any post-release fixes this time.
As usual, the download link can be found here.
...
2023-09-03 13:26:36 +0000 UTC View PostHey friends!
In case you aren't aware, each month we gather character suggestions from all willing patrons on our Discord server. Our artists then pick 10 choices they like among the submissions and put them on the next character poll.
WARNING: Due to changes in our release schedule, as of this month we'll offer less time for character suggestions and pol...
2023-09-02 01:48:05 +0000 UTC View Post
Hey friends,
As the title says, we've added an alternative face version with sculpted eyes for Velvet. The updates files have been uploaded to the usual place.
Enjoy!
Bulkamancer Sculpts Team
Hey friends!
We've updated Velvet model after finding a few issues with it, so please redownload.
This incident showed us that releasing the model before finishing test-printing was a mistake, so we will not do the same with our other August projects, as opposed to what we originally planned due to time constraints. Therefore, the remaining models will...
2023-08-30 01:13:43 +0000 UTC View Post
Hey friends!
Time to talk about September models! But first, if you've been following our posts, you should remember that we are trying to streamline our release schedule and get out of the constant delays that we've been experiencing this year. We are finally putting this plan in motion next month by preparing our October models ahead of our usual schedule. The plan is to spre...
2023-08-28 17:55:40 +0000 UTC View Post
Hey friends!
With much excitement, we are happy to deliver Velvet Crowe, created by our guest artist Mofu specifically for Bulkamancer Sculpts, split and presupported by our team!
The model is already available for download in the usua...
2023-08-27 19:05:58 +0000 UTC View Post
Hey friends,
For those of you who don't hang out in our Discord server, I've prepared this post to show the current status of all models we are currently working on.
This is no surprise that we have invited two external artists this month to help with our workload. We are very grateful for their help an...
2023-08-18 13:42:55 +0000 UTC View Post
Hey friends,
Just wanted to let you know we are participating in an ongoing MyMiniFactory Summer sale! You can grab our models with 40% OFF with the coupon SUMMER23!
https://www.myminifactory.com/users/BulkamancerSculpts
Please note that not all our models are on MMF...
2023-08-17 10:27:00 +0000 UTC View Post
Hey friends!
Same story as yesterday, Clive was sitting at my desk for two weeks before I managed to take pics. With this post, we can finally close July. :)
Printed on Elegoo Saturn 2 using the following resin:
Enjoy!
Des
Hey friends!
So, um, I'm not exactly sure how many people still want to see last month's test prints at this point, but nevertheless. Both Mordred and Clive has been sitting at my desk for two weeks waiting to be processed. But, I guess, better late than never!
There were some reservations about posting this one because not all of us were happy with the painted face. But ...
2023-08-14 15:44:26 +0000 UTC View Post
Hey friends!
In continuation of my recent tl;dr post, here are quite a few pics from our current progress on our newest Loyalty Reward model, Bulka. Oh, and in case it wasn't clear, it is just a working title, we still haven't come up with a good name for the character. If you have any great ideas, by all means, let's hear them!
Cheers!
Des
Hi friends!
Precisely one month ago we opened a poll for the next loyalty reward. To our delight, many people voted for an original character modelled after our mascot. We were excited about the project and wanted to do it properly. And thus began the tale of (not really) successful failures that I'm finally about to tell. Honestly, I was very hesitant to reveal everything that...
2023-08-12 20:49:59 +0000 UTC View Post
Hey friends!
We know you've been waiting for the next poll, so here it is!
I'll try not to bore you with long rows of text this time and only mention one topic. People have been wondering whether we allow repeated entries in consequtive polls, so I felt I should elaborate. It's ...
2023-08-10 16:32:36 +0000 UTC View PostHey friends!
In case you aren't aware, each month we gather character suggestions from all willing patrons on our Discord server. Our artists then pick 10 choices they like among the submissions and put them on the next character poll.
Please note that your Patreon account needs to be connected to Discord in order to see the suggestions channel. It's really simple, just f...
2023-08-06 04:21:01 +0000 UTC View Post
Hey friends!
It's time to reveal the guest model of the month! Last week, I was trying to pick another creator that would be willing to participate in a model swap when Milana told me "Ask Azerama!" And indeed, why wouldn't I ask him? After all, Azerama opened his Patreon just a month after we did, and we've been closely following his success from the first days! Luckily, we ha...
2023-08-03 14:33:56 +0000 UTC View Post
Hey friends!
We're cutting it very close this time, just barely pumping out the last release before the month is over. Yet, somehow we managed!
As always, you can find the download link here.
The model is available on Patreon until end of August 2023.
Some technical in...
2023-07-31 22:35:37 +0000 UTC View Post
Hey friends!
We are happy to announce the timely release of Mordred! The files are available in the usual place.
The model is available on Patreon until end of August 2023.
And if you are curious about two alternative NSFW versions that were commissioned by 3D Printers Guild...
2023-07-30 15:00:17 +0000 UTC View Post