Hello everyone!
Small beads for a contest on Printables.
3 cubes of 10 mm³ 🤏
The hole is hexagonal, 5 mm, made for the cord of my hoodie. Inside, as an experiment, I created something like a spring.
2025-03-24 01:08:53 +0000 UTC
View Post
The design accidentally came to my mind. I took my earlier acorn design as a basis.
The first test whistle turned out to be quite loud, but with each new iteration, it sounded worse and worse 😐.
In the end, I found the right shape after several iterations 😑 .
This whistle is the...
2025-03-16 00:56:22 +0000 UTC View Post
🙌🙌
I made two keychains in the shape of clovers. Both are flexible versions.
If you look closely at the clover leaf, you'll notice that the layer lines are not parallel but instead converge toward the center, forming a natural pattern. A layer height of 0.2 or 0.24 mm works perfectly for this design.
In the first version, the lines were parallel, and the pattern resemble...
2025-03-15 00:44:50 +0000 UTC View Post
Hi everyone!
I created a design for paleontology enthusiasts and, of course, 3D printing.
I based my design on a photo of the Phacops rana fossil.
My version consi...
2025-03-07 23:21:21 +0000 UTC View Post
Hi everyone! 🙌
Ten years ago (give or take a meter 😋), the 3DBenchy design by CreativeTools was published. Who doesn't know it, and who hasn't printed it?
The other day, this little boat became 2025-03-05 15:37:54 +0000 UTC View Post
Where do you usually get models for printing? Which website do you like the most and find the most convenient?
Multiple choice is allowed
Three simple designs, modification of the popular Flexi Fish Bone keychain design.
Anglerfish 💢:
Swordfish 🤥:
2025-02-20 18:07:06 +0000 UTC
View Post
Hello, world!
💾 BEEP-BOOP! WHIRR-CLICK!
This robot is inspired by the famous Smoking Spaceman 🤖💨 robot from the Japanese company Yonezawa. The Smoking Spaceman is a toy released in the mid-20th century.
The original robot was prod...
2025-02-18 03:00:10 +0000 UTC View Post
Of course, first you need to print it 😉.
All parts are already oriented in space as required.
I marked the supports manually. They are necessary at the front due to the overhanging part.
SpongeBob a-ga-in! 🧽
Another addition, I created a few more arms and accessories.
The punk rock bracelet is designed to be put on through the arm from the forearm side. ...
2025-01-28 00:22:03 +0000 UTC View Post
Hi all!
It so happened that this month I did little modeling and really missed 3D printing, since I was far from the 3D printer 🏥
I didn’t do much of what I had planned this month, and what I did was too raw for publication 👎🫠.
These heads in the form of Christmas light bulbs 🎄 were modeled quite simply by me, I simply took my early project as a 2024-12-31 16:30:49 +0000 UTC View Post
Hi all
🙌
After I made SpongeBob, it became necessary to make a container to store his arms and all sorts of accessories.
There is no padlock, but there is a simple latch.
The chest t...
2024-12-23 19:49:10 +0000 UTC View Post
This is an express design, based on a spiral lamp bulb that I made earlier.
One of the p...
2024-12-10 00:06:26 +0000 UTC View Post
Hi everyone!
Today we have turkey 🦃
the basis of a character with flexible legs (BlobBuddy).
2024-11-24 13:13:05 +0000 UTC
View Post
Funny design inspired by the game Bad Piggies.
I once made tentacles for Blobtopus, so I took this as a basis, only here it is not seven, but as it should be eight 🐙
I printed using two filaments (white...
2024-11-09 11:24:09 +0000 UTC View Post
I make new versions of old designs.
Today is about Spongebob.
He had thin legs that could easily break. Initially its height is about 10cm. I made it bigger.
Now the height is about 16cm (just over 6 inches) Two days ago I accidentally printed a test piece with green filament, it looked good so I decided to make a zombie version 🧟.
2024-11-01 00:21:30 +0000 UTC
View Post
Recognizable shape of a famous lighter 🔥
Two variations:
Zippo v1.2 - top arc, bottom marking.
Zippo v2 - right angles, oblique lines at corners.
...
Hi everyone!
Two Halloween-themed designs.
PumpkinBuddy is the basis of a flexi-legged character (BlobBuddy).
The whole model is printed without supports ✅...
2024-10-15 14:01:59 +0000 UTC View Post
🙌
Variation on Spiral Fidget.
The design of the light bulb, which I initially did not want to publish and left as a test. Having tested it on a new printer, I didn’t notice any particular problems. There are indeed some minor nuances when printing.
LampExt.stl, LampInt.stl - I used a raft, to increase the contact spot.
LampInt.stl - ...
I decided to do a simple ring design.
I previously made 5 needlecases whose heads now fit together on this ring.
Link for active subscribers ‼️
👇
/3dmodels/Rigs/TheOneRing(switch)/
The ring is not c...
2024-08-10 14:31:09 +0000 UTC View Post
Hi everyone 🙌
I decided to experiment a little with spiral designs. You may have come across the name "Impossible Passthrough"
Many different shapes have already been invented, of which the pyramid is probably the most popular.
I tried to make it in the shape of a matryoshka doll 🪆 and a light bulb 💡
2024-07-31 16:10:50 +0000 UTC
View Post
I decided to make such a strange design. 3D printing time is quite long.
I wanted to make it in vase mode and print each part separately. But in my design the three small phalanges are nested in descending order within each other. Otherwise, when folding the cone, the small part may fall through and get stuck.
I printed the upper part without filling, it is attached to the cone ...
🌾🌾🌾🙌🌾🌾🌾🌾
Flexible ear of wheat, as a keychain. I made several variations.
Three types of fixation (variation 1 optimal), number of grains 10, 12 and 16
print in place, no support ✅
2024-07-04 00:42:06 +0000 UTC
View Post
Another character in the form of a needlecase.
This is Perry the platypus.
I think even if you haven’t watched the “Phineas and Ferb”, then you definitely came across a picture with this platypus, it has a memorable teal color.
In this case it's the off-duty secret agent version.
I started making this character right after the fro...
2024-06-13 00:14:06 +0000 UTC View Post
A little experimentation with flexible fabric so far has led me to this design.
Initially, I just wanted to make a flexible brick, one made from clay.
But in the end he was transformed into a brick from a toy construction set.
I took as a basis the principle of a flexible bone tha...
Once a friend came to me and I told him about 3D printing.
I showed him the capabilities of the program, and for fun I combined two designs. On the same day I printed and gave him the resulting toy.
Maybe someone will find this funny combination useful (file attached to post).
2024-05-31 13:14:47 +0000 UTC
View Post
I think you've seen a surface like this many times.
The flexible surface is quite strong, each link is connected to 4 adjacent ones.
I didn't come up with anything new, I just studied how other designers do.
2024-05-25 00:25:38 +0000 UTC
View Post
Hi everyone 🙌
I haven't published for a long time.
I prepared Fry, made him flexible legs, modified his forearms, added early heads and new hands. I also made a megaphone and money 📣💵
These are links for my active subscribers.
2024-05-21 22:42:49 +0000 UTC
View Post
hi everyone!
This is a slightly modified Blobbuddy ☹️
Wonderful egg holder, with legs.
https://cults3d.com/en/3d-model/home/eggbuddy
These are links for my acti...
2024-04-23 14:42:14 +0000 UTC View Post
