bigovereasy

Fry 2.0 🚀

Added 2024-05-21 22:42:49 +0000 UTC

Hi everyone 🙌

I haven't published for a long time.

I prepared Fry, made him flexible legs, modified his forearms, added early heads and new hands. I also made a megaphone and money 📣💵

These are links for my active subscribers.
/3dmodels/Futurama/Fry 2.0/

Now in more detail

I have already described some assembly points before:
https://www.patreon.com/posts/good-news-95565613

The knee part of the leg is connected using filament, and the elbow part of the arm is also connected using filament. I use a filament as a pin, make a margin of 2 mm on both sides, and then press it with a hot object

I left letters on his legs to make it easier to understand where the left leg is and where the right.

There is a hinge at the base, it is simply inserted into the body with a click.

I usually try to make the seam at the back, you can see it on the arm.

It is better to print the forearm as in the photo below, with the wrist hinge up

I printed his hands at a slight angle to the plane (of course with supports), this makes this part of the joint stronger, otherwise there is a possibility that the ball will break off from the hand and remain in the forearm.

All hands are increased by 10% (relative to the first version) , visually it looks better 👍

For head #1,5 and 6 eyes #1 are used.
For head #2, eyes #2 are used.
For head #3, eyes #3 are used.

The jaw (maxilla.stl) is inserted first with the front protrusion, then you need to press on the back teeth.

maxilla.stl and tongue.stl are relevant for head #6

My printer uses one filament, so I printed the money in two steps, first I printed the outline (fringing.stl),

then the main part (sheets.stl).

One hundred dollar bill, it's simple 💵

After printing, I dipped it in boiling water and gave the sheet the desired bend.

Later I decided to scale the money by 20%

You may notice that the head4.stl file is missing. But in fact, in my file structure it was Nixon's head. Although I have thoughts of making a version of the upset Fry.