VulnePro

WIP preview of new Zbrush fighter build

Just dropping a quick update peek at what is looking to be a brand new fighter STL release this month. It will be immediately apparent this new fighter shares the same visual design language as the SF-123 B Möwe and the 2023-08-13 01:36:20 +0000 UTC View Post

Peek at new paints underway

Dropping a quick update:

As the post's title says, there are new painted prints underway and, yes, that's a large print of the Stiletto C-1, primed for pending basecoat paints. As the photo shows, I have some prints undergoing paints. I'll be sharing more of some of these soon (some of these should be soon but I have no plans to rush them). I'm also planning to design some new fighters i...

Navaja B blue tip paint

Here we have a collection of photos of one of the Navaja B prints I painted. I have plans to paint several more Navaja B fighters but, July wasn't having it, we'll get to them in August I imagine. I quite enjoyed how this one took to paints, with the subtle new details so I look forward to painting and sharing more of them.

Blue tip markings Navaja B: Tamiya AS5 Light bl...

So... this happened in the middle of July...

Thus throwing the month into a bit of chaos.

This is my cat Jamie, and, unfortunately he somehow (as I didn't see him do it) scratched his cornea, in his right eye. He now has a space helmet so he can commune with the radar mice from the moon. As one might expect, he has required a lot of additional direct time, attention, and care (a lot of extra lap time, in fact he just hopped on my l...

TE-60 Stiletto C-1 Bare metal silver paint

This month's first post is much later than I typically would kick off the month, and this is due to working heavily on the final stretch of content for that giant Palladium Books gig I have noted has consumed my time the last month, or so. The good news is the work is very much at the hind end, so I ho...

More test prints for pending STL releases

Its been a busy month with both the Palladium work and home related work but I've been getting some print test in the mix as well. I just ran mini print tests of; the Stiletto C-1, Lancea, and Sagitta. As the photos show, all 3 of them printed beautifully, considering, again, they weren't designed with mini versions initially in mind. The Sagitta had a pancake of the left rear engine nozzle. I ...

New U.A.P. 2 UNKNOWN (alien fighter)

Introducing the U.A.P. 2 UNKNOWN

This is the other fighter update that was waiting in the wings, an upgraded variant of the original UAP UNKNOWN fighter; Zbrush renders and photographs of the first test print (actually 2 printed so far).

The new UAP's obvious difference ...

TE-60 Stiletto C-1 painted prints

While I still have a significant amount of work for Palladium Books, it also looks like I'm ahead of the allotted time frame I have to complete the work. Obviously this is a good thing, so I've been squeezing in some paints of the recent test prints. There will be more, along with pending new STL releases for June.

Today I have a collection of photos of recent Paints of the new 2023-06-07 02:39:35 +0000 UTC View Post

New TE-65A-2 Sharurä A.I. gunship variant

Introducing the TE-65A-2 Sharurä  A.I. gunship.

I unexpectedly took a left turn at Albuquerque and ended up creating a new Sharurä A.I. gunship variant last night when I had initially planned to finish another new fighter update I have in the wings.

Once I had started  working on the original Sharurä Zbrush model I quickly got on with creating the ne...

TE-72 Lancea painted prints photos

I was going to post these after I posted the Sagitta paints but Palladium Books hit me up and said the new gig was now go (it's been in the wings for over a month now) so I got a wee bit sidetracked.

Here we are with a collection of photos of recent Paints of the new 2023-05-27 03:35:08 +0000 UTC View Post

Rather sizable gig for Palladium Books now underway

As the header states, I'm now knee deep in a pretty big project for Palladium Books, one that is high priority for the publisher. Unfortunately I can't say a word about what it is, other than..., yeah, it's a sizable chunk of work and fans of Palladium will likely really dig it. This is a good thing, this winter was brutal in heating costs so this gig is a welcome pending injection of cash. Thi...

TE-66 Sagitta painted prints photos

While I've certainly posted photos of the painted prints before these are ultimately intended for promoting this humble endeavor, so I've found myself posting them more everywhere else to promote. I certainly intended and should post them here as well more, and that I shall. Seeing these are promotional photos these posts will be pubic (also so the many folks following on Patreon can see and en...

TE-62 NAVAJA B test print base coat paint WIP

Those of you that have been here for awhile, or at least have looked at all of the prior releases, should be familiar with this fighter; the TE-62 Navaja. However; this particular print is the new TE-62 Navava B ...

New paints, prints, and STLs will be coming

This update comes later than I planned as the intended print-a-palooza ended up dial-in-the-Saturn-a-palooza. That said, that's fine. While dialing in my Saturn S was a bit of a pain in the ass, especially with the temperatures bloody still dipping quite a lot in the evenings (I did print quite a lot into the night) I have finally honed in on settings that seem to work well, including to my sur...

TE-62 Navaja B

Introducing the TE-62 Navaja B.

The Navaja B is a variant of the original TE-62 Navaja fighter built off the original Zbrush model. Like the previously posted TE-60 Stiletto C-1, this is essentially an iterative upgrade of the original Navaja. This new version of the Navaja sp...

TE-60 Stiletto C-1

I've been busy cooking up several updated variants of some of the original first wave of fighter releases. Here's a peek at a fancy pants new version of the Original Stiletto fighter. I was experimenting with a few new approaches to the way I had been building these, and this resulted in an approach that results in smaller polygon/file size models with more detail.

I plan to run a print t...

Stiletto Mk.II, Sagitta, and new Lancea paint WIPs

Palladium books hit me with a sizable (and pretty cool project, unfortunately I can't say what it was yet, as with the prior recent work I've done for them) rush project that took a chunk out of the first week of April. So with that work out of the way I'm currently working on finishing some paints the the last 3 fighter releases, which are the subject of the collection of preview photos above....

The hangover of the rough winter temperatures is over...

Much catching up to do and catch up I shall. Here's a peek at several new fighter paints underway. The new TE-72 Lancea is in the mix here. Now that the weather is consistently 40 degrees, and higher, I'll be printing aplenty. Running a Sagitta print now, as I want to do a US Navy blue Wildcat style paint, like I did for the box art illo. Plenty more to come, plenty to do.

This winter wa...

Finally ran the first test print for the new TE-72 Lancea

The weather has finally... finally has begun to warm up and somewhat resemble spring here in Michigan-land, so I've finally run a test print for the new TE-72 Lancea fighter. Here be a couple 'o' photo-grapha-magigs. I plan to print several of these, so more to follow (painted examples for sure).

This winter was particularly stupid cold and brutal so far as heating costs are concerned (s...

TE-72 Lancea

Here's a look at what will be, tentatively, March's new fighter; the TE 72 Lancea (Latin for spear, or lance).  As with the preview of the Sagitta, this is still somewhat of a WIP, but very much in the final stretch toward completion.

We have another fighter that's clearly part of the Stiletto design lineage and is arguably somewhat of a souped-up hot rodded out Stiletto Mk. II. Al...

Introducing the TE-66 Sagitta

The new fighter has print; I've run two test prints so far, both with successful results. While the first test print turned out (the unpainted print) I hadn't noticed that resin had pooled in the two front intakes so I did a second Chitu file with a less steep angle on the fighter and new supports. The second print (the Tamiya Ocean Gray base coat painted print) went without a hitch. I have a h...

TE-66 Alba

Here's a peek at a pair of renders for a brand new TE fighter that is the likely candidate for release this month. While the fighter is mostly complete these are still WIP renders, as I have a bit more detail greebling I plan to add. If the weather cooperates and finally warms up (it's been consistently under 20 degrees for some time now) I'll be running test prints for this one soon.

A...

Minipolooza 2099... or some such somethin'!

Just droppin' a peek at some of the various mini test prints so far. As seen in the handful of photos, the Stiletto (both versions) look great in a smaller tabletop size (note the ancient D&D dice from, literally the 80s). The Stiletto II prints shown are using the same pre-supports that the mini test STL included with the Garage kit release uses. As seen in the second photo, there have bee...

HAPPY NEW YEAR 2023!

As the header states, a very Happy New Year to everyone!

2022

An entire year producing original 80s anime garage kit style 3D printable sci-fi space fighters. The collected image of all of the box arts really brings that home. While I may not be cranking out piles of STLs, like the bigger 3D printing Patreons do, I've, instead, tried to produce unique designs with...