UncleJessy

Prusa Core One - Hands on!

This is easily the best Prusa 3D Printer experience I've had so far... but the big question will be... is it enough?

More NEW printer videos coming next week! and the Week after!!!

Lots of new printer videos incoming 🤘

The next handful of weeks should be pretty wild.

As of right now I have 3 new printer videos in the works on upcoming 3D Printers - and they are all looking really dang good. One has seriously surprised me with how good it is.

Not to mention working on my K2 Plus video & my Anycubic Core XY multi color printer (I can’t remember all these names)

U...

3D Printed Chicken Wings?

Sure, why not right? 😂🤣

This has been a whacky fun project. Will be sharing the 3D files for anyone that wants to print their own chicken wings (blank & buffalo bills style).

Currently trying to figureout how to make these look more Buffalo sauced. I might just dip them in actual Buffalo sauce 😂🤦‍♂️

Giga Sized Hueforge Project coming soon!

This has been a wildly fun project & excited to share with everyone.

Attempting to do a HUGE Hueforge print!

I won’t lie the Hueforge app is wildly complicated but they have a bunch of short tutorial videos that really do a good job of explaining how it all works.

Essentially you are making a multi color “flat” print by ...

Inside or outside resin 3D Printing?

So Elegoo sent me their resin heater unit to test out. I figured the best way I could test it is to print something overnight outside with some difficult to print with resin 😂🤘

PS - I don’t recommend this… dumb YouTube / content creator stuff right here 😂🤣

Not the bees!

Testing something different. Beeswax paste + 3D Prints

Video should be up later today. Going to do one more round of paste & buffing

What causes this? 3D Print finish experiment

Heya folks! Nearing the last step on a new 3D Print finishing technique (no, it doesn’t involve less sanding 🤣)

But I’m noticing my print is two tone where it extrudes out from the body of the rounded part.

This has been sanded but it was evenly sanded throughout the part.

I’m assuming this is caused by how the part was printed 🤷‍♂️🤷‍♂️

Just...

New Resin Calibration file is awesome!

I’ve shown off the cones of calibration a zillion times in videos… well the folks at TableFlip Foundry have a new calibration file they should be releasing in the next month or so.

Basically it works just like the old one + more practical tests!

1. Success / fail cones - you want the success side to all be connected, fail side all disconnected

2. Supported parts - a sword...

FLSUN S1 video this Friday

Working on the video for the FLSUN S1 for this friday

This thing is crazy fast & the prints are looking amazing

Supports failed on the magneto helmet

Definitely some wonky things & yet again another printer with half baked firmware/software

The good news is the prints are all looking really good so far

I can’...

What’s your favorite filament brands?

I have some upcoming project ideas and want to know what filament brands you all love to work with!

Complete shocker I know… mine is elegoo PLA since it’s so dang cheap & I can buy colors like black in bulk.

I’m also a big fan of Cookiecad & Polymaker

Starting up my first ever SLS Print

Folks at Micronics have sent out a few prototype SLS units to some folks to test out before they go live with it!

This is my first time ever using a SLS printer!

Just finished the assembly (pretty straight forward)

And firing up my first print 🤘

What sort of complicated cosplay print should I do with it? Will for sure be printing some miniatures to test th...

Tiny Resin 3D Printer

Getting to play around with the Tinymaker resin 3D Printer! Should have a video up tomorrow on it then a full review once I get my Kickstarter backed units! This is just an early production test

Super cute little resin printer. Super slow & the detail isn’t that great but still a fun little novelty machine.

Something very cool is on the way!!!

Just got a bunch of shipping notifications about a wildly new 3D Printer thats being built and coming soon.

Will definitely be sharing more once I get my hands on it & printing! Time to learn an entirely new process of printing 🤘

Profile Updates are ready!

Sorry for the delay folks but I now have a bunch of updates for profiles!

Printer Profile Reward Quick Link https://drive.google.com/drive/folders/1mbJrZ-7kLFE2Qt8TGKPAdO_fKCt0rnlH?usp=sharing

I've also included the OrangeStorm Giga Orca Profiles that I've bee...

Dusting off this project 🤘

Should have a video update in the next week or two on this long standing project 😬

A quick test fitting based on a bunch of prints I just recently finished for the base

Not sure the head will fit in my room 😂

Giga profile updates

Okay folks, I’m behind on sharing some profile updates but hoping to get that sorted Sunday.

I think I finally sorted my Giga print shifting issues and funny enough it’s due to something in Elegoo’s orca profile they sent me to test.

My profile that I created runs great with no layer shift issues after testing and comparing prints from both slicer profiles. I’m ...

Elegoo Giga & Giant Rancor Print

https://youtu.be/XY-Gl-p0HnY?si=T25gJ4q2B6YMlLIu

Here is my look at the elegoo giga! Huge prints & the issues I’ve run into so far with it.

I just hit up Walmart this morning for paints to get started on getting this painted 😬🤘

I also reprinted the bone i...

Giga video / profile updates

Heya folks. My giga video should hopefully be up later this afternoon. Good & the bad & the huge!

Also have some profile updates I’ve been working on this week and will be uploading Monday or Tuesday

Updated orca profiles for N4 printers including faster print profiles & less stringing 🤞🤞🤞

I’ve also had a lot of requests for Neptune 3 prin...

Orange Storm Giga arrived! live stream tonight 8pm

Will be live streaming tonight on YouTube at 8pm

Giga delivery Friday!

Got my confirmation it will be delivered Friday and I think I just found a galactic sized print for it 😬🤘

May the force be with this printer delivery and assembly 😂

Giga Delivery ETA - Friday!

Pretty dang excited. I believe other creators will be getting theirs throughout this week and potentially posting live streams / content with it.

Itsboyinspace has been showing it off and it’s looking amazing!

https://www.tiktok.com/@itsboyinspace?_t=8kcOS33jMUg&_r=1

<...

Giga on the way!

Got an update that my Elegoo Giga is on route to me hopefully will have it on hand sometime later this week.

Itsboyinspace has one arriving tomorrow! I think he might be streaming it on his tiktok

3D Printing my own $2,500 Airless Basketball... sorta

This video was way too much fun. Also, note to self, when you buy a new wireless mic make sure to test it for more than 5 minutes before jumping into a video recording. I didnt realize it was so bad. Will be futzing with that later today after I clean up all of the broken basketball bits 

I'd definitely recommend printing one of these in a Flexible PLA or that Super PLA from overture...

My Longest Video in a long while

Okay this is probably my longest video I've posted in a long while. Doing a deep dive testing 14 ways to fix your loose 3D Printed Action Figure joints. Will this be a huge video... no def not, but it was something I really wanted to dig into and see if I could find a way to tighten up these 300% scale Transformers from ToyMaker3D. Pretty damn happy with the results! 

2024-03-07 14:22:38 +0000 UTC View Post

Obsessed with Airless Basketballs

I’ve been printing A LOT of airless basketballs over the past week for an upcoming video.

There are a few file options out there and I’m testing out printing them in a bunch of different materials and sizes.

I have some new material arriving today that I will be running as my last set of tests before publishing.

I will say, even if they ...

Testing Joints!

Okay been doing A LOT of testing for this next video. Doing a detailed look at 14+ different options for making better articulating joints for your 3D prints. This will for sure be a good bit longer than most of my videos but will be a fun walk through of a bunch of different options. Everything from rescaling, tpu, floor polish, resin and more.

Excited to get my 300% Optimus ...

Spring Loaded Wolverine Claws!

https://youtu.be/PM3DsiuDIDw

Here are 2 awesome Wolverine projects in 1 video!

You seriously need to print these spring loaded wolverine claws! They are way too much fun and I've been playing with them non stop. 

https://makerwo...

Fingers crossed this ResinLapse was in focus 😂

Doing a video on some Wolverine claw prints that are pretty dang cool & different than your basic claws.

Resin printed this massive set of claws & an arm for a display overnight and modified the stand to fit an acrylic vase I found at a store called At Home. Banana on top for scale 🤣

Will also be uploading a PetG profile for the Neptune printers as I printed s...

Scale of Optimus Prime 🤘

Marvel Legends Wolverine

Huge Transformers

Wrapping up the last bits of recording / edits for this Transformers 3D Print video

Toymaker3D files scaled up 300% in size 😂

24” tall Optimus Prime

Still need to assemble the throne for Megatron that just barely was able to fit on the Neptune 4 Max

Will be sharing the .32 profile that I used for the throne as well which ripped through the huge throne pr...