Terp Pearl Station (2oz)
Added 2023-03-14 23:54:57 +0000 UTCA new design for the Terp Pearl Station that uses a 2oz glass jar!
Features a silicone mat, two silicone dishes, tool holder, and a terp pearl cleaner!
The silicone dishes & mat are made with the custom mold included: "DabPadMini(SiliconeMold).stl"
Required Materials:
*Platinum cured silicone is required to assemble this product*
I used (LET'S RESIN) brand Platinum Cure Silicone. Here is the purchase link from amazon: https://amzn.to/3BiflV9
For the mica powder I used (Rolio) brand. Here is the purchase link from amazon: https://amzn.to/3FCS8jb
Purchase link for 2oz glass jars: https://amzn.to/3ZyOU7y
Comments
any YouTube videos on making the silicon matts ?
JC3dprints
2023-06-26 03:16:30 +0000 UTC8g roughly for each of the 3 pieces. mix a little roughly 28-30g total and you should be good
Justin Heaton
2023-04-07 08:23:03 +0000 UTCwould it be possible for you to add a note with a rough estimate of how much silicone a mold will use? This is my first time getting into molding, so figuring out how much silicone to mix up for how many molds I have has been one of the more challenging aspects so far. Thanks for all the great models!
Kade Sullivan
2023-03-18 23:16:02 +0000 UTCI’ve never used that printer before, but layer shifting is most often caused by the incorrect tension of the belts or pulleys not being secure. I’m not familiar with the FLSUN V400 so I’m not sure where to look for layer shifting on that printer. The design of the stations are not the cause of layer shifting, the models have no effect on that issue. This would be an issue within the printer or slicer software.
Matthew Moscato
2023-03-16 15:02:13 +0000 UTCAlmost every print looks to be layer shifting. I’m using cura to slice. FLSUN V400 printer. Fresh new dry filament. I’ve printed countless other items with no issues. Only fails I’ve ever had to date were with the stations
Daniel Baldo
2023-03-16 14:48:23 +0000 UTCPrint failures can happen for multiple different reasons. Bad adhesion, under extrusion, layer shifting, etc. If you send pictures of your failed print in discord I can help diagnose the issue
Matthew Moscato
2023-03-16 13:58:37 +0000 UTCIs there a reason why every single station I’ve attempted to print fails. I’m printing at 20% infill. Delta style printer
Daniel Baldo
2023-03-16 13:56:59 +0000 UTC
