Chitubox Profiles / Support setting access
Added 2021-04-10 13:40:51 +0000 UTCHey everyone! Finally got a majority of my profiles exported and organized.
As long as you are in the $2 or higher tier you should be able to see this at the top welcome section.
I also made a spreadsheet of my typical resin support settings for small / mid / larger prints.
I will also be looking at exporting my FDM profiles... right now I primarily still use Simplify3D but am working on porting some of those over to Ideamaker. Spoilers... I hate cura haha
Thanks again for all of the support!
Should have a Lotmax $100 printer video up Sunday and a Large wash and cure station video up Monday!
Comments
Hello Clayton, do you have updated support setting on the site?? Also the zip file resin 3D printers is empty
JamesJaye
2021-09-09 12:37:44 +0000 UTCI'm in the same boat. I think he said in a recent video the settings are the same? But the build plate is a little smaller.
swissfreek
2021-08-17 00:37:22 +0000 UTCCant find them. Please help
Carlos Reyes
2021-07-15 01:43:37 +0000 UTCWas there a profile for the Mars 2 provided? Or does anyone have one? Saw the one for the Mars 2 PRO, just not he Mars 2. Thanks...
Erik
2021-05-20 21:20:36 +0000 UTCHello, I'm looking for egloo plant based resin settings. Do you have them? I didn't see them in the Mars 2 pro folder. Thanks
Tommy Towne
2021-05-12 19:47:15 +0000 UTCHi! New here :) I am also having some issues with water washable and supports. I will try the support settings in the spreadsheet but will the water washable resin settings be available anytime soon?
Kyle Joseph
2021-04-26 20:00:50 +0000 UTCJust joined but also dont see them?
George
2021-04-26 18:35:42 +0000 UTCAny update on where to find the settings?
Rob Durham
2021-04-16 21:53:04 +0000 UTCI figured it out. I increased my pledge to $2, but didn't change tiers. I have them now, thank you very much.
Colin McConnell
2021-04-12 22:03:09 +0000 UTCI’m gojng to see if I can make it easier to access. It should hopefully be at the top of your page in the site
Uncle Jessy
2021-04-12 20:22:41 +0000 UTCOh let me see what I have for that. I believe I was just using my abs like settings for it
Uncle Jessy
2021-04-12 20:22:11 +0000 UTCThey should hopefully be at the top of the page in the patreon page. I’m going to see if there is a better way to handle it
Uncle Jessy
2021-04-12 20:21:38 +0000 UTCI upped my pledge to $2 yesterday, but I still can't see them.
Colin McConnell
2021-04-11 12:14:32 +0000 UTCThanks Man! Looking forward to trying these out. Would be intrigued to see your settings for Elegoo Water Washable resin on the Saturn if possible - seem to be struggling to get this dialed in on my printer for some odd reason
Darryn Ballantine
2021-04-11 07:59:54 +0000 UTCClayton Thanks, Man!!! Because I am new here, where are things at?
Ron Costa
2021-04-10 20:07:58 +0000 UTCHi there jt should hopefully be at the top of the page. Will confirm once I get back.
Uncle Jessy
2021-04-10 19:58:19 +0000 UTCOh let me check that out. I might punched that in wrong 🤦♂️ will look that back over once I’m done with my run
Uncle Jessy
2021-04-10 19:57:29 +0000 UTCHope they help! I will be uploading more machines and tweaking as I go
Uncle Jessy
2021-04-10 19:52:23 +0000 UTCAre you saying the welcome session on YouTube or here? I joined directly here.
Stuart Brown
2021-04-10 17:34:17 +0000 UTCThe Head supports in the "Smaller Prints" section seem kind of big. 1.2mm Contact Diameter is pretty big and 0.8mm Contact Depth is even deeper than the Heavy supports for the "Larger Prints" section. Maybe a copy paste error? Perhaps it should be more like 0.8mm Contact Diameter and a 0.5 or 0.6 mm Contact Depth?
Adam Shiver
2021-04-10 14:30:13 +0000 UTCThank you, looking forward to trying out some of your profiles
kevin sullivan
2021-04-10 14:08:28 +0000 UTCExcellent work Clayton. Thank you!
Fotis Μint
2021-04-10 13:55:28 +0000 UTC
