Updated the Google Drive with Cura & Prusa Slicer
Added 2022-12-24 00:07:45 +0000 UTCOkay, so I'm pretty horrible with Cura & Prusa Slicer but I've managed to try and take my profiles from S3D and convert to Cura & prusa Slicer (UPDATE: included Bambu Slicer - Silk PLA profile I use)
I've added a new folder for those in the pinned post on google drive link. but here is a link as well!
https://drive.google.com/drive/folders/1ZGaKzV3IeMnJuT64BqtY2T5HXydJYcC1?usp=sharing
Honestly that Cura Profile print time is blazing fast and I cant figureout why Prusa Slicer is still printing the same files a good bit slower using the same settings.
Also, in cura is there an easy way to take a Profile and make it available for other printers? I pretty much use the same basic settings across damn near most of my machines in S3D and the only major thing that changes in the build volume or layer height/infill etc.
Working on getting my "S3D v5 Review vid up for tomorrow... its a fun one haha π€¦ββοΈ
- PS please do not spend $200 on S3D that is just absurd
Stay warm out there peeps crazy crazy windy & cold here in fun filled NY
Comments
I'm using full version Cura 5.2, not the Elegoo Cura. But to import, I selected the Neptune machine, then under profiles I went to import and selected the .curaprofile file from my downloads and it installed. I'm hoping this works for the N3Plus, mine should be here this week. I'm new to the patreon but I thought I read somewhere that it would work across the lineup.
Erick Saint
2023-01-23 02:33:39 +0000 UTCHi. I have the same problem. Did you solve it?
Tenshi Yamamoto
2023-01-16 15:52:40 +0000 UTCHi Jessy. I was able to download to the zip file; however, I can't import the profiles for the Neptune 2 into Cura for my Neptune 3 pro, it says the files can not be recognized/are corrupted. Any help would be appreciated, thank you in advance!
Julio G
2023-01-06 14:19:21 +0000 UTCHey when I go to the google drive link it won't let me open any of the files in the folder
Jacob Brooks
2023-01-03 06:04:35 +0000 UTCMerry Christmas and happy holidays thanks for the settings and i noticed you have the mono x settings on there what UV do you have your printer set to with the settings you used ?
sin akuma
2022-12-24 23:20:31 +0000 UTCSWEET THANK YOU, do you have one for the Neptune printers with a .6mm nozzles? i can't seem to get my retraction settings right for it and i'm stringing like crazy.
Shakeem Rue
2022-12-24 01:54:54 +0000 UTCChampion, I'll give it a try and let you know. We use the N2s (which is rather frustrating that on Ultimaker Cura 5.2.1 it doesn't seem to support anything but the N2 and N2D...welcome any profile tricks from yourself or patreon followers to change that)
Michael Tharme
2022-12-24 01:52:48 +0000 UTCbwahaha they are coming up on their 43rd bday
Uncle Jessy
2022-12-24 01:22:43 +0000 UTChahaha you and me both. I'm not 100% sure but I hope its just the print settings not the printer info
Uncle Jessy
2022-12-24 01:22:19 +0000 UTCWOW, Jessy... you've had these files last modified in Jan 1980!!!! Impressive haha
Michael Tharme
2022-12-24 00:45:34 +0000 UTCQuick question, Does your Neptune profile work across all Neptune's or just for N2? Sorry if its a dumb question, I find Filament printing highly confusing compared to resin printing.
Michael Tharme
2022-12-24 00:42:40 +0000 UTCChampion, will check this out now while I'm awake
Michael Tharme
2022-12-24 00:39:26 +0000 UTCThanks! I just recently tried cura again for the first time in a long while and it was pretty damn fast! nice to see!
Uncle Jessy
2022-12-24 00:13:18 +0000 UTCOhhh I also Updated with Bambu Slicer - Specifically the Silk PLA profile I use to try and get glossier prints - trick is to basically slow down the outer walls
Uncle Jessy
2022-12-24 00:12:27 +0000 UTCDude! Thank you! Canβt wait to try them out on Cura. Merry Christmas to you and happy holidays.
Brad Mobley
2022-12-24 00:08:51 +0000 UTC
