Neptune 4 / 4 Pro Prusa Slicer Profiles
Added 2023-07-29 16:43:51 +0000 UTCHeya folks. Going to be getting caught up on some profile updates this weekend.
Here is a link to the Prusa Profiles I setup for the Neptune 4 / 4 Pro - both are using the same profile as I'm not seeing a massive difference in print quality from one over the other.
I still need to refine these a bit more but figured it would be a half decent starting point.
FYI these were originally copied and tweaked a bit from an AnkerMake M5 profile that was created by Just Trey.
https://drive.google.com/drive/u/1/folders/1ZGaKzV3IeMnJuT64BqtY2T5HXydJYcC1
I'm also going to upload my new Saturn 3/3ultra and Mars 4 Profiles for Chitubox.
I will also export those over from Lychee as well.
FYI will be starting on a fun video here in the next week - I'm planning on comparing a bunch of these Faster FDM Printers. Also starting back up on the Magneto Statue prints this week!!! Will be sharing some progress updates here with y'all on that!
Comments
I don't see the neptune 4 pro
Gustavo Rojo-Buendia
2025-01-02 03:22:08 +0000 UTCCant seem to find the Neptune 3 Max profile for Orca, sure it was mentioned on the review vid there was one on Patreon?
Chris Thompson
2024-12-07 14:55:40 +0000 UTCany chance of a neptune 4 plus profile for prusa?
Kenny Paquette
2024-11-22 15:04:17 +0000 UTCDo you still have Profile for Neptune 4 Pro?
sc.artstation
2024-07-07 07:40:42 +0000 UTCNoob question but how to I add the N4 profiles to cura... I've tried everything and it's just not working π
Andros Jones
2024-04-01 08:47:06 +0000 UTCI'm dealing with the exact same concern, did you get an answer to that issue yet?
LateElf
2024-01-05 04:24:27 +0000 UTCi cant find the Saturn 3 Ultra Profiles am i looking in the wrong place
Nicholas Dimelow
2023-12-22 12:25:37 +0000 UTCCanβt find Neptune 3 Pro profile
Joshua Gomez
2023-12-16 05:07:58 +0000 UTCAny plans to build a n4 and n4p orca profile?
jean roussy
2023-12-15 07:08:16 +0000 UTCI just started using this profile and its been the best yet and im super happy with with. But yes, at the end it finishes and then sends the plate to the back instead of the front. And was also wonder about the wipe before print. This was the first time that has ever happened and now im seeing how useful it actual was lol.
Ronnie Ruki
2023-11-26 23:42:51 +0000 UTCI can second this comment. Also noticed that whilst the extruder is warming it lets out filament that just drops off on the bed plate. Should there not be a wipe before the print actually starts?
Cameron Hatton
2023-11-10 22:48:15 +0000 UTCJust got here and Started using this profile. Noticed that at the end of the print, my N4P sends the bed to the BACK of the printer instead of the front. What could be the cause?
Antonio Reinaldo
2023-11-04 18:42:54 +0000 UTC@julian Venado its because klipper is brand new and elegoo hasnt added support for custom profiles yet
Dylan Wiley
2023-10-30 02:08:15 +0000 UTCAny ideas? Elegoo Standard prusa Profile also uses marlin (legacy)
Julian Venado
2023-09-25 21:27:21 +0000 UTCI notice that the retraction distance for this profile is 3mm but for the Elegoo Cura profile it is only 0.5? Is there a reason for this difference? I am not an expert, but 3mm does seem like a lot?
HendrΓ© Page
2023-08-30 17:42:43 +0000 UTCI also would like to know this, as I am having problems loading it properly
Shawn McCrindle
2023-08-23 22:54:13 +0000 UTCIs it meant to use Marlin (legacy) as the G-code flavor under printer settings general instead of Klipper?
Austin Farris
2023-08-23 01:03:14 +0000 UTCI've been using this with PLA. Is there a version for PETG or ABS? Or is that already part of it and I just need to configure that filament type in Prusa?
John Aarnio
2023-08-19 03:17:44 +0000 UTCDOH! I feel even more dumb now, but thanks! :D
Kraussian
2023-08-17 02:45:17 +0000 UTCGo in import config
Deangelo Manuel
2023-08-16 19:41:54 +0000 UTCReally dumb question: how do I use this? I've tried opening up Elegoo.ini and adding these under a newly created [printer_model:NEPTUNE4], but doesn't seem to work.
Kraussian
2023-08-16 10:31:27 +0000 UTCA dumb question: When importing the Neptune 4 Pro profile into PrusaSlicer, do I need to set the GCode flavor to Klipper?
Brandon C
2023-08-07 16:07:37 +0000 UTCStarted using your settings for my new Neptune 4 Pro I started playing with yesterday. How would I go about making the bed move forward instead of backwards at the end of the print?
David Wickham
2023-08-06 02:03:07 +0000 UTCThank you for this! Got mine built yesterday and am having a blast with it, but don't want to have to use cura
Doov
2023-08-04 16:28:14 +0000 UTCI just built my 4 pro tonight, thanks I will try this! I got it printing good in cura 5.4 using defaults
Wade Williams
2023-08-04 05:08:22 +0000 UTCJust got my Saturn 3 ultra in today. I'll be very interested in your pri t settings for that one with the 8k space grey resin!
Royce Johnson
2023-08-01 06:24:23 +0000 UTC
