As promised, I’ve created the rest of the Lantern rings! :)
so just refresh the folder and in the "stl" folder you will find "other rings"
The initial design was made with this in mind, so all you have to do is print another "R2" part and then the "R4" part you wish to use — and that’s it! :)
There are several ways you can print this: either by printing the "R4" part ...
2025-04-19 15:07:43 +0000 UTC View Post
EDIT : BEFORE YOU PRINT - by accident i uploaded the old iteration of the "cap" parts - i have now fixed this , so please just redownload so you have the correct "cap" stl and 3mf . THANK YOU !!!!
I'm excited to share a completely redesigned Daredevil: Born Again Billy Clubs project.
This is not an update to my previous billy club design. It’s a fresh ta...
2025-04-17 13:21:59 +0000 UTC View Post
In brightest day, in blackest night...
I'm excited to finally share my completed Green Lantern Ring Project—a pulsating, light-up ring paired with not one, but two stands: a floating stand and a classic static display stand.
This is by far the best ring prop i've ever worked on !!! :D I’ve put together a complete package that includes:
STL and 3MF files
Ok, this is the last sneek peek of the lantern ring project. I know this one takes a while, but as you can see this will be a veery complete/unique project unlike ANYTHING on thr planet :D
Floating stand incoming - i am now in the last phase of getting everything ready , all test are cimoleted and it should be ready soon :)
Thank you for the patience guys, i love you, and thank ...
Thank you all so much for your patience while I was sick — I’m finally back on my feet, and I’ve got something insane to surprise you with!
I’ve been working on a 3D printable Green Lantern ring prop, and this thing is wild — it has a strong pulsating green light that honestly makes it look alive.
The best part?
Minimal electronics
2025-04-10 17:24:41 +0000 UTC View Post
Aaaaaaand i wrapped up Faramir’s sword along with the small pendant piece featuring the symbol from the hilt guard of his sword. I followed the same workflow as with Boromir’s gear—there’s a press-fit version with alignment strips for easy assembly, and a fully combined model that’s ideal if you plan to scale it down for resin printing.
All parts are split for color-separated p...
2025-04-05 17:31:28 +0000 UTC View Post
Boromir’s sword is now finished! As with the dagger, I used official Weta references and auction listings from the original props to ensure accuracy.
For flexibility in printing, I created both a press-fit version with alignment strips for easy assembly and a fully combined version that works great for scaled-down resin prints. Additionally, all parts are separated by color, making mul...
2025-04-03 15:44:46 +0000 UTC View Post
After a little break, I'm back at it—continuing my quest to recreate all LOTR weapons! This time, I've been working on Boromir's and Faramir's swords, along with Boromir's dagger. The dagger is already done—I have created the dagger both with a textured grip and a clean grip so you can add your own details. And as always, I have used the official Weta references as well as auction listings ...
2025-04-02 14:18:50 +0000 UTC View Post
Surprise! New Captain America Marvel Rivals Armor Release!
Oh, and did I mention—it’s my birthday! And what better way to celebrate than by dropping the full Captain America Marvel Rivals Armor set. I really wanted to get this one done for you guys for today
In case you didn't know - New Patreon members - you guys can still grab this armor plus everything included in...
2025-03-27 14:15:01 +0000 UTC View PostJust a quick work-in-progress update for you guys!
I figured there’s no better way to tie together all the Captain America and variant projects than by tackling something a bit more ambitious—the Captain America armor from Marvel Rivals.
This one's a serious challenge and definitely a time-consuming beast, so it'll take me a few more days to finish it up. But I couldn’t re...
I’m super excited to share my latest project with you all - i've been at this one quite a while, even tho it may appear simple at first
So, its full-scale, wearable Captain America Shield, designed with usability and some customization in mind!
- LED-Ready:
There’s a built-in slot for LED strips, ( i was not sure which strip to use and what batter...
I recently had the urge to model a blaster, and right on cue, Colin Bruce showed me an awesome design from The Art of Star Wars: The High Republic. In the book, there’s a unique space pirate-style blaster created for a character known only as "Nan". The concept art had a very cool vibe, so i thought i'd give it a shot
Since the reference was purely stylized artwork, I decided ...
2025-03-14 14:23:33 +0000 UTC View Post
I’m excited to release my 3D model of KB’s visor from Skeleton Crew. This isn’t just a static prop—it features a functional open/close mechanism, making it perfect for display or cosplay.
Soem key Features:
Moving visor mechanism (as allready mentioned :D ) – Open / close options
Desk stand – Display it when not in use.
Remember KB from Skeleton Crew ? , and her super cool vizor ?
Well, its almost ready. I wanted to replicate the movements/functionailty of the vizor, so you can open/close it simillar as how she does it, only it is not automated, you will have to open/close it manually :)
I'm also including a desk stand display and slots for led's.
I have almost completed the design and ...
After making The Flash variant of Captain America's helmet, you guys had some amazing ideas—so here are a few more fast variants! Ready for download :)
Huge thanks to Rob Davis for suggesting the first one—Captain Canada!
Hydra Helmet – Because why not go full villain mode?
U.S. Agent Helmet – not sure what to add here XD
Loki Helmet – In two versions, because mischief...
I just finished modeling Adam’s sword from the upcoming Masters of the Universe movie for 3D printing!
This one has a special feature: a press-fit insert system designed for structural strength and easy assembly. No need for aluminum rods or glue—just a precise fit that locks in place.
If the pressure-fit strips end up too tight or too loose, you can simply adjust the scale f...
Since i'm on the "Marvel" run latelly , i figure'd you'd love to see a Galactus helmet in true comic-book style!
Some key Features:
Support Collar – A hidden internal structure that ensures the towering helmet stays perfectly aligned with the eyes and mouth.
Pre-Sliced for Easy Printing – No need to struggle with oversized prints—it's optimized for sea...
Here's another quick one guys :)
I received a reference photo for this one, and I just couldn't say no to a "custom" temple guard mask.
i tried to stray true to the reference design, however i did have to change some proportions, and details to ensure wearability, eye position so you can see while wearing the mask, and sleek design that will still allow your face t...
Hey guys - a little somthing FOR EVERYONE to download :)
I call this one the Demon Hunter Blade. 🗡️🔥
Designed to work seamlessly with the Bambu Lab motion-activated sound and light kit, this blade brings some serious energy to your collection.
Included in the package:
STL & 3MF files f...
Here it is, guys—the new Red Guardian helmet from the upcoming Thunderbolts movie is ready for download - "we are makers" tier members - FEBRUARY PINNED POST
Before we dive in, I worked on this alongside another project that will be released soon as well—so stay tuned! 😊
Now, about the helmet: This was entirely based on the images we've seen in the trailers. Si...
2025-02-19 15:01:09 +0000 UTC View PostThe droid update is finally complete and you can download it ! I’ll take a moment to go through all the updates and what's included:
Project Re-release – The project now includes two versions:
Android-controlled version: Uses an ESP32 with custom code that you can upload and that allows you to drive the droid via your androi...
2025-02-12 18:24:41 +0000 UTC View Post
You guys know I love crazy swords , and this one was on my "to do" list for longer than I can remember. something to keep you busy while you wait on the repair droid update.
As most of you know, it is a Soul Reaver sword. This one i tried to match as close as i could to the legacy of Kain soul reaver 2, however that model is super low poly so i mixed it a bit with artworks
based...
As promised I have been working on making the droid easier to build and available to everyone by eliminating the need to use the phone :D
I need a bit more time to get it all ready, but here's a little recap:
- changed the drive motor for a stronger one
- changed the gear ratio that in combination with a stronger motor will provide more speed
- new wheels design ( repaired...
Sorry it took so long guys, but I wanted to print out every piece to make sure the print orientation and settings are perfect, or at least close to perfect so you can print it all out on the first try :)
attached you will find print photos and settings i used - in form of 3mf file for bambu studio
for those who are new to this - 3mf file in bambu studio contains print orient...
Sooo i did mention i have a little "variant" on captain america in the works :)
When I was working on that one I noticed it has quite a resemblance to the Flash helmet. So i made some slight changes and well, now we have 2 helmets, captain america and the flash variant helmet.
Release is similar to Captain America one, but I'll let the photos do the talking :...
Here is the first one of the month :)
Captain America helmet from Marvel rivals.
I have added several versions like fully combined ones and split by parts and color, so you can just use a specific color filament and not worry about the post process.
you will also find even more pre sliced options for all of these for you to choose from
As always , made ba...
Here it is guys, sorry it took so long, but it has much more details that one would think at first glance :)
To keep it short, I'll just go over some details and I'll leave the photos to do the talking :)
keep in mind the entire bust is not a full size head, it is downscaled to be used as a display piece, and be able to print on prusa/bamblu lab pri...
Sorry i've been a bit quiet for the past few days, but i'm trying to get this guy done as accurately as possible and as soon as possible, buuuut it's quite a task :D fun tho :D should be ready soon, it's still a work in progress, but just to let you know what's on the way :D it will be a bust, not the entire full size robot
2025-01-20 23:25:30 +0000 UTC View Post
I know i know, i do random stuff sometimes :D
I have worked on this helmet a looong time ago, so i finally decided to revisit it, and upgrade and create the rest of the armor, so i present to you
Garruk Wildspeaker from Magic the Gathering :)
The armor is split into several segments for easier build:
- arms plates
- axe
- belt and chest piece(t...
2025-01-14 17:20:30 +0000 UTC View Post
I did promise i will make some custom predator weapons so here's the first one :)
A short sword inspired by the Yautja culture, blending their iconic aesthetics with subtle nods to samurai tradition. While working on this, I envisioned the sword as something a Predator warrior would have brought with them to Earth—something functional, symbolic, and steeped in their al...