A weird way to start the post , right ? :) - but more on that later, i'll talk about the project first :)
So as some of you allready knew i was working on Cad Bane blaster for a while. Now the bad thing is even tho we do have some info about the blaster we dont have many clear images.
So what we do know is the base of the blaster is the Colt 1851 - so i told myself "I'm gonna buil...
And another one done :)
I would say we now have a completed Mandalorian armorer's armor :)
As i stated in previous post , the helmet and the hammer are old rewards and were uploaded before, so you can pick them as one of your old rewards, so uploaded this time are :
- chest piece
-back piece
-left and right boot plates
- left and right pauldron - that have the weaw...
Ok, new month, i'll send you over the new month's folder link to your inbox as well in a few moments, but for now you can grab the link at the end of this post :)
First - once again im trasnsfering boba fett armor and bad batch helmets to new month ( i hope to complete the bad batch helmet set this month), so you can grab them there.
Also, i did mention i...
2022-02-05 20:42:58 +0000 UTC View Post
Ok boys and girls, new month
so a few words:
1 - from now on the new months project links will be sent on 5th of every months ( it has come to my attention that patreon is processing pledges for the first few days, and there were cases the links were sent out and some people didnt get htem bcs their pledge was not processed yet, so by the 5th it should all be done and no one s...
2022-02-02 20:08:46 +0000 UTC View Post
Ok guys, here it is, i've made the last update that was requestd, and thats the shoulder mount :)
The old version was a bit too squared, now its more rounded overall and much more closer to provided references
I've also added a split version into 2 parts, that use the same old 8x8 mm pins i use in almost all my designs
PRO TIP: print out bunch of 8x8 pins bcs they are use...
So here it is, the final pieces to complete the Boba Fett armor , the EE-3 and the sidearm
I've done some minor updates to those bcs they were pretty much allready good in my opinion, and i didnt wanna do any major changes for everyone whos allready half way thru with printing :D
so the minor updates on the sidearm are something that was requestd and thats an aditional "tri...
Finally, the project im sure you all have been waiting on , the armor is released :)
Took me 25 days to make it, wich is quite allot, but that was quite a challenge :)
First i would like to thank everyone for not abandoning ship while waiting on this one, sorry i only realased 2 models this month, but the second one has over 100 parts, so i guess that counts for something :D
Not gonna waste much of your time, just wanted to share some updates that were requested to the boba fett helmet bits, and they are as follows :
1. Rangefinder:
- Body seperated into 2 pieces
- added “holes” on “body 1” to mountthe metal stalk- included a version without the“holes”
2. Right lower ear:
- added “3 dots” to both clean...
2022-01-21 22:26:34 +0000 UTC View Post
So i know you're allready anxious about the boba fett armor, its almost done, but just to show you why its taking so long, im gonna prerelease the helmet :)
Once you see the work i've placed into it, it will be clear why its taking so long :D I've been working on the set for 17 days straigh now ,so you can expect the same detail in the armor as well . just a few more days and its go...
2022-01-17 22:23:20 +0000 UTC View Post
New year, new projects, and here's the first one of the month :)
As always i did a bit of a my own spin on this one, it took longer than i woud like to admit, but i think you will like it :D
I always try to come up with new ideas for the builds and projects or how to improve existing ones, so another one of those "crazy" ideas i had was - well its a data chip - why not use i...
My dear friends and patrons, i would just like to take the opportunity to sincerely THANK YOU for everything this year. We made some fantastic projects together, and i will forever be thankful to you for allowing me to continue doing this work.
Not gonna waste much of your time on long speaches, just wanted to wish you happy holidays to you and your families and your loved ones :)
<...
Finally the first weapon from Halo is completed :)
I wanted to make somethign that i didnt see out there first, and the Spiker just seemed too interesting to pass :D I love the combo of mechanical / organic parts to it, so as always i added several options
Everything can be assambled with the good old 8x8 pins, and there are multiple options/slicing...
2021-12-22 22:11:50 +0000 UTC View Post
Finally the Wrecker's helmet has joined the Bad Batch set, wich means just one more :)
As always i added multiple slicing options, so you have:
- fully combined 1:1 version
- dome and helmet "body" seperated
- "ears and back details" seperated version
- and few slicing options on those
- wireframe cutouts for helmet scaling included
- small scale version for 1/12 sc...
Well yeah, its that time of the year so i figured i'd add some ornaments to our patreon :)
I still have some things in mind but here's a bit of something so i dont keep you waiting :D
what is it ?
1 - I made the pumpkinOlorian, its only fair i make the ChristmasOlorian as well :D
2. yes, i did , i know XD but couldnt help it, i loved the idea so i made some Missl...
Another "functional" saber has joined the patreon :)
This time the Darth maul's saberstaff. Its something i wnted to make for a while now, and as i mentioned i had quite allot of open projects, so im trying to finish them all up, so you can expect quite a few items rather soon :)
Now what's diferent about this one ? Well first you need 2 lightsaber core's and 2 bla...
2021-12-07 12:53:57 +0000 UTC View Post
Dear Patreon members,
Another month is upon us, so as usual while Patreon is processing pledges so you don't have to wait until its done, here is the Jango Fett helmet.
The "December" folder link will be sent to your patreon inbox once the pledges are processed, and i hope to whip out another model by then :)
About the Jango helmet:
as always there are multip...
2021-12-01 20:05:32 +0000 UTC View Post
While i keep working on new stuff i thought i'd surprise you with a little something for the upcoming black friday deals :)
In case some of you wanted to purchase some old rewards and dont feel like waiiting, all patreon members get 60% off on everything in my etsy shop untill end of the month , so here is the code :)
2021-11-19 11:45:37 +0000 UTC
View Post
Ok, time for some new new stuff - its not a secret im a huge Dune Fan, so i had to add some "toys" to patreon wich im sure other Dune fans will like as well :)
So let's get started, a total of 4 projects have been uplaoded :)
1 - Gom Jabbar update - So after i released the Gom Jabbar from dune i got some new references with a better view, so its turns out it wasnt ...
2021-11-10 16:29:16 +0000 UTC View Post
I was thinking to add this one all toegether with the other Dune models i'm working on that will be ready rather soon, buuut what the heck, here it is :D
It's the Gom Jabbar needle, as seen in the new Dune movie used by the bene gesserit "witch" :D :D . Now, given the sizing of the model and the details, this is almost sure to be printed on resin printers only (unless you...
2021-11-04 20:05:57 +0000 UTC View Post
New month is here , and The Mysterymakers patreon is now exactlly 1 year old :D yeeeeeij :D crazy how time flies :)
And to celebrate, first project for the month will be the Imperial knigt armor with the functional lightsaber hilt :) yes you can use the same electronics as in other lightsaber hils :) I will also do my best to add as much stff as possible in this "birthday" m...
Aaaaand its uploaded, the. I also indluded a little stand.
Now the knife is rather detailed so you will find the files sized are a bit larger especially the full combined one - for that reaon i added another fully combined version that is visually the same but is a tiny bit lower quality but and much smaller file size if you slicers will be giving you problems.
...
For the past few days i have spent my time doing the updates that were requested to some of previous models, so here they are :)
1. Tech glasses frames - both for the glassed and the pointer there are now both solid and thin lenses 3d models for 3d printing them in resin or vacuum forming - files are in the folder
2. Bo katan belt buckle and hangers - tha...
2021-10-21 10:17:37 +0000 UTC View Post
Ok i finally made the required updates to the pumpkinlorian :D
before i talk about the project updates just a few words about the mesh - the interior might be a bit "lower poly" then we are used to but thats due to the fact that i didnt design it for all the changes, so i had to improve, however good news is that interiors is not really importannt, and ofc its still not t...
2021-10-15 15:34:51 +0000 UTC View Post
Here are some new projects to help you get over the Monday and the upcoming week :)
So lets start with the first one
The pumpkin'O'lorian halloween pumpking - i figured we are all gonna print lots of pumpkins, so why not a badass pumpkin / mandalorian mashup :D This is a display piece, but seing it now, im wondering if i should turn it into a helmet XD - downside - its gonna b...
2021-10-11 18:26:58 +0000 UTC View Post
Squid game has become quite popular, quite fast, so i imagine its gonna be a good topic to pick for this years halloween ( unless everyobody does it :D :D ) so here they are, frontman and soldier masks.
I have seen all ready quite allot of versions being released out there, so i'm moving on to new stuff rather fast, but i did want to make these :)
Whats diferent in this vers...
Ok i wanted to add this one with some other models im working on but i think this one needs its own post bcs there is allot of things updated in here :D
Ronin saber updates, there are now 31 new updates/pieces added :D so let me try to explain it all as short as possible :D
1- There is now a V1 and V2 - the V2 has upper hilt details changed for you to cho...
2021-10-06 14:52:10 +0000 UTC View Post
Looks like Facebook is experiencing some trouble so im sorry if i didnt answer the messages just yet, but oh well, in the meanwhile i'll make the post here :)
It may appear at times that i add random stuff, but the reason for that is that i work on quite a few things at the same time so as i feel comfortable with a finished project i release it :D
quite a few other things are in t...
As soon as SW vision hit one episode, one saber stood out from the crowd, and its also the one you've asked quite allot about. In my personal opinion this was the most badass one in the seriies, so ofc i had to make it.
Yes, the lightsaber is functional. It uses the same electronics as i "lighthammer" and "lightnarsil". So basiclly all you need to do is once again take out electroni...
2021-09-27 17:49:51 +0000 UTC View Post
As some of you know i have been meaning to jump into making 1/12 figurines/sculptures for a while. One thing preventing me was i wasnt hapy with my skills and was still practicing. So as i felt more comfortable with my sculpting skills i have decided to make a start-to-finish project just so i can put that progress to the test.
So, not to put on too heavy presure on my self right fr...
2021-09-24 09:48:41 +0000 UTC View Post
Aaaand im calling this one done :)
So as it was suggested i have made the helmet stand for our Dain Ironfoot helmet. A while ago Vince Wilson suggested to turn his hammer into a stand, and i loved the idea.
So what i did was first created his hammer - it has an oopening for 10mm rod for strength and stability, ofc multiple printing options, like hallow sides, o...