Groundeffected

Update.

Hey dudes. Here’s a lil update from today. Also the link for the Kickstarter for avant garde brushes.

Is here.: https://www.kickstarter.com/projects/1754631339/avantgarde-tools?ref=456wn8

That’s an affiliate link and to be honest I probably earn more from that tha...

Popeye colour palette

Hey dudes. Here is popeyes colour palette as well as him wearing the dankest piece of bling hahaha.

Also I made my own can wrappers cos I felt like they would look better. I will provide the image with the tattoos and the cans wrappers in a post today or tomorrow and if you print on a4 transfer paper using the exact scale then it should fit your model if you printed your model at the ori...

Poop eye

Hey dudes. I’m almost done with popeye. Got stuck in yesterday and made this anchor from scratch to get my weekly metal challenge in. Supposed to take no more than a few hours. This bloody thing took me 2 days and I still have to clean and polish it..

eye pop just needs his eye painted and his spinach tins completed then he’s done. Don’t know what next model is yet cos I’m waitin...

Saturday WIP dump

Hey dudes. Not so many pics from today. I’ll also have to make some tattoo transfers for him. And I’m thinking to save me time painting the spinach cans I’m gonna make stickers for them too.

Next lady up for a shave

Next up is tanuki figures popeye. Base is printing now and I’m busy editing a blog from yesterday. Hope you having a great evening or day depending where you are.

Early access

Hey dudes. So I managed to get the video up in time the only thing is that because I tried to rush the upload I forgot the dolphin 🐬 sound again.

It’s worse. I didn’t even mute the bad word 👀 few like I could replace the video but maybe a solid reminder of the gravity of the dolphin portion of the video is important once I’m a while hahaha

Also you guys have any opinio...

Cruella colour palette

Hey dudes. Here is this weeks colour palette I hope it helps. I will hopefully have a early release for PATREONS of this video if I can get it done by tonight

Hope you all have had successful prints today

And tell your mom I said hi.

Wips

Hey dudes. I only managed to get a little bit done on cruella today. Only got her face left to do I think then I’m calling it done.

I’m still annoyed I made her a tad smaller than I’d have liked so she’s not 6th scale. And I can definitely tell when I started painting the face.

WIP dump

Hey dudes. I have started work on Cruella from mcm3d today. I made a boo boo and made her 60% of 1/4 scale. Should’ve been 65 but I made bad maths lol. Nothing knew. Also I have made a ring themed on this version of Cruella.. I didn’t record the ring stuff thought I may be pissing you guys off with the metal work while I study it. Let me know if it gets annoying and I’ll stop posting abou...

Next model

Hey dudes. I tried to upload a video yesterday it’s still attempting to upload. So I am gonna just upload it to youtube and send a link here tomorrow it’s annoying lol but it is what it is. Also here’s the model for next weeks video it’s from mcm3d and is Cruella from the movie I am a Disney fan and I’m actually quite amped for a slight change off super heroes onto a super obscure vil...

Packaging

Hey dudes. Some people asked me to make a packaging video. I made it for you guys. I may post it to YouTube later. But that depends on what your guys responses are. I’ll update you guys tomorrow on what the content plan is for the next couple weeks as I’ve managed to stabilize things again.

Have a nice day

And tell your mum I said hi.

Huge mess and upgrade.

Hey dudes. So as you can imagine with the new stock upgrade came a load of mess and I have been uber busy with all that. This week is laser video with the xtool f1 ultra so I’ll have more printing stuff from next week on. But in the meantime I have an idea for how I can explain eyes even better. And I have time this week to work on that so I’ll get my idea together. I also need to edit a vi...

What I did with the money

Hey dudes. So I’ve almost blown all the money I made from selling the models. As I said the store in town is closing and I need to step up to serve the community, so I upgraded the shops stock first and foremost. Let me know if you think there’s something else I can stock or should stock

Vivi colour palette

Hey dudes. This must be one of my smallest palettes to date! It’s crazy haha hope you enjoyed the video. I’ll give you guys an update on things to come over the weekend.

Smol update

Vivi from Tanuki

Hey dudes. Here’s both in progress and complete shot of Vivi. Long weekend for me sorry for the hiatus for a the last day or so. Anyway I put a massive spotlight in the base it’s so bright it could be a desk lamp lol. I also put LEDs in his eyes and hands too. Haven’t figured out how to split the power off the led yet though.

Jinx eyes

Hey dudes. As promised here is the extended cut for the eyes of jinx. I left all the strokes in so you can see each and every single one.

I sound a bit dead in this video but I’ve had a long week so don’t worry about me. I’ll pick back up again in a day or two. Just been many long days and late nights and stress of shipping statues etc.

here’s the link in case I...

Vivi wips

Hey guys. Soo I kinda had a bit of a long week. No excuses. But I got a tiny bit done in prep for vivi from tanuki figures. I put a friggen spotlight inside it lol 😂 I cut the eye video for jinx today but u don’t get round to voice over yet. I will make that a priority for tomorrow. And I’ll share how far I get with vivi too.

Early access

Hey dudes. So as I said I would try to get early access for you guys. I just about managed by the skin of my teeth.

Took a lot to get through this model considering the circumstances this week and I still haven’t managed to get everything sorted yet lol

I have a video for the eyes of this model that I’m gonna extend and show the full process no cuts and try add some value with...

Jinx colour palette

Hey dudes. Here we go again. Here’s the palette of paints for jinx… it’s a fairly large one for this model but there are a bunch of colours that make up some of the simpler bits.

I will have a video on her eyes for patreons available by the weekend. And I’ll post an early link for those in the didn’t f$&k off tiers.

I’m about to make a thumbnail and get ...

First model of the year. Jinx

Hey dudes. So I finally managed to get jinx done among packing models and many trips to the post office. Here’s my first offerings for the paint gods this year. I hope to have capt he bloody eyes painting if I got it it decent enough focus then I’ll have an extra for the patreons too.

Wips jinx

So I got some more done today. Loads of freehand on this model that my brain somehow chose to ignore when I I saw her hahaha but I managed to get her legs done. Tomorrow I’ll work on her torso but I also got to pack a bunch of models. Hopefully my massive bag of packing peanuts arrives hahaha 🤣

Jinx WIPS

Hey dudes.

It’s been a while since I posted a WIP hasnt it. Holy moly. But we are back at it again. And for my first model of the year it’s gonna be this epic jinx from nympha 3d.

I really like the composition of this model.

As a sculptor I really like nympha’s work she has a style similar to serghaz who I really like as well.

Anyway I was still and am still dea...

Sh!t

I’ve opened the gates of hell. I have never received this many mesages ever. Literally hundreds in inbox and insta I’m definitely gonna be disappointing a lot of people.

Actually it’s my worst nightmare come true I’ve avoided the how much question all these years and I’m now being asked left and right. I wanna let the patreons have a chance too but man there’s so many messag...

Lil update

Model is from nympha. I will try to convince her to put this as her welcome model if I can.

Jinx

So here’s the jinx for the first model of the year. Printed on the nova whale4 in two different resins because they just don’t send enough to actually test them properly. Think in future I’m not gonna use the resin sent with machines. One bottle isn’t enough for me to properly test. I got one of the washable and one of the high detail so I had a huge fail at the end of the base (not bec...

Printers have started again

So I’ve started up the ole print mill once again. It’s a new year. And we have some new models to make. This is jinx from nympha 3d.

Should have a full model by tomorrow printed on the nova 3d whale 4 while I test the machine.

Upcoming models

Hey dudes. So I know I’ve been a bit slack on here last few weeks. But I was trying to take a small break from things (we all know that didn’t e realy work lol) anyway I’ve got some news on the models that are coming up. First is jinx from nympha 3d and then vivi from tanuki.

I’m gonna light the living daylights out of vivi and jinx has some free hand stuff on her that might be o...

Smol update.

Video for ease of showing and less typing..

Warden bot is getting closer.

Spent a little bit of time of this robot today. But I think I’ve used the wrong kind of servos so tomorrow I’m gonna get new ones and try again.

I also got sent the new nova whale 4 ultra. Not sure why all machines are called ultra now days but I guess next version will have to be called final boss or something.