Been working on some dice tests to try various things for the upcoming LED dice video! There are soooooooo many variables to test. Some will be part of the video (like trying to embed a floating LED and seeing if it still works) and some won’t be (like how many drops of alcohol ink do we need to add some color yet not be too opaque for the lights) So far we are learning a lot and Joobie appro...
2022-04-14 15:00:01 +0000 UTC View Post
Our editor put together some additional footage of Joob playing on her cat scratch chair - she completely turns into a kitten when playing on it! Also please enjoy our riveting commentary. -Katelyn
2022-04-10 15:00:00 +0000 UTC View Post
We’re officially done with rope for a while… but at least Joobie likes her chair! In today’s Aftershow we cover:
- How we almost made cat scratch pants
- How heavy were the weights actually?
- Underestimated supplies
- Made us want new actual dining chairs… our old white cushioned ones have not held up
- Various methods we considered for the upper part of the chair (do...
This is the face of someone several hours into wrapping a chair with rope, covered in itchy fibers, questioning what they’re doing with their time… (but not really because we will do anything for the Jooooooob!!!) We’re really excited to share this project soon! Honestly, it was a bit more work than we expected but we also like it even more than expected so it’s a win-win. -Katelyn
2022-04-06 20:03:06 +0000 UTC View Post
So here is a weird pitch... what if instead of trying to prevent your cat from scratching your furniture, you wanted your cat TO scratch furniture?
Well, at least the furniture you customized specifically for her to scratch! So for our next video we're turning a chair into a scratching post. We chose a chair because Joobie likes to sit next to us while we eat meals and we wanted her to ha...
2022-04-04 16:07:32 +0000 UTC View Post
In this Aftershow we cover:
- How important it was to be patient at the end of the project and how not rushing led to SUCH a better end result and video
- How hard it was for Evan to keep the robot a secret
- Other things we might want to use the robot base for
- How hard it was to mix a cozy bed vibe with a more car like aesthetic
- The struggle of how much time to put into d...
Hey guys! This is a pretty far in advance preview, but we're working with Makeship (the same company we did our plushies and charms with) for their Pride Month initiative this upcoming June! We're setting it up with them on the backend so that all the proceeds from this plush go to LGBTQ2S+ organizations/initiatives/charities. All that to say, we wanted to share a preview of the Supurrvisor Pri...
2022-04-01 03:30:34 +0000 UTC View Post
We had such high hopes for this paint... I'm sure we'll get to use it somewhere else eventually -Katelyn
2022-03-29 15:22:59 +0000 UTC View Post
Hope Joobie approves! -Katelyn
2022-03-27 16:35:33 +0000 UTC View Post
Hey guys! We re-tried a type of video we dabbled with years ago, but taken to a MUCH more extreme level... a hot sauce challenge! We thought we'd gamify it a bit with some video games but the video ended up being 90% hot sauce challenge, 10% gaming because we* were so bad at the game. Despite the hot ...
2022-03-24 18:16:48 +0000 UTC View Post
Can't wait to work on this project!
2022-03-22 19:05:26 +0000 UTC View Post
Note from Evan: Guys I love this so much! Not sure if anyone will realllly notice the difference but it will make filming easier for us (less adjusting the cameras while filming). Also I just really love solving problems with technology.
Note from Katelyn: Hey guys! Y’all probably don’t know this, but one issue we’ve had in our shop for a while is that while we are really well lit f...
2022-03-18 15:38:30 +0000 UTC View Post
We've made some really great progress on our storage room! -E
2022-03-14 16:28:24 +0000 UTC View Post
Hope everyone has a great Friday and weekend! In this Aftershow we cover:
- Who we thought would win at the beginning, after we finished ours, and after we unboxed theirs
- Behind the scenes of the actual light element
- A sneaky trick we used to get iridescent sheets faster
- The long break in the middle of filming
- Our thoughts on having a tie
- Where will we put these i...
I just saw that there was some interest in the 3d model and files used to make the gem lamp so here they are, just for y'all! - E
3d model in fusion 360: https://a360.co/3sYzN9Y
password: eandksupport
Flat files for lasercutting: https://e...
2022-03-09 17:16:34 +0000 UTC View Post
How do I express my feelings about how this lamp turned out? 💃💖😍🎉🥳🙌 It looks SO GOOD! Honestly we didn't know how close we could get to the finished look of the "buy" but I'm so pleased. The vividness of the colors surprised me (the iridescent film seems to compound when you can see through it to other panels) and it also has much more of an "infinity cube" look than I e...
2022-03-09 16:30:11 +0000 UTC View Post
Hey guys! So to get the geometric "gem" shape of the lamp right, Evan 3D modeled it, laser cut each face, and we held the hold thing together with a LOT of blue tape (adjusting as we went to get all the angles right). All this will probably amount to a very quick timelapse in the video haha. The "small" scale test we did to the right (in cheap draft board) was helpful as a practice run.
<...
2022-03-06 17:16:45 +0000 UTC View Post
Wanna see the messy room we try to hide and how we're starting to organize it?
2022-03-03 23:50:28 +0000 UTC View Post
We're doing a buy vs. DIY as our next video and honestly what we chose is a bit intimidating! We have a lead how to make iridescent sheets but the joints... the base... the light itself are all things we'll need to figure out. I'll also need to figure out how to best 3d model such a weird shape. Wish us luck! -E
2022-02-28 17:00:33 +0000 UTC View Post
Hey guys! Periodically we get asked if Joobie still uses the cat wheel, and to be honest she *does* but here's what it looks like:
1) Joob walks a few steps
2) She sits in the middle and looks at us
3) If we don't make a move, she'll walk a few more steps, stop, and look at us again
4) Usually at this point, we're overwhelmed by cuteness and give her ham
I'm sure part (most...
2022-02-25 17:49:46 +0000 UTC View Post
Remember when Katelyn "jokingly" said she wanted to flock her nails in the velvet keyboard video? Well... we did it 🤣
It turned out just as awesome and horrible as you're probably guessing. Excited to share with y'all this Friday! - E
p.s. Katelyn's nails were safe in this process! We used a peel off base coat, then red nail polish, then the flocking powder on top of the red nail...
2022-02-22 16:10:07 +0000 UTC View Post
Checkout this aftershow for:
- Why we feel compelled to do experiments like this
- How many lenses we had to buy just to get one
- How we had to order lenses before sponsor approval
- If we were to remake these, what would we do differently?
- A test we skipped hoping for the best
- Comparing lenticular texture to diffusion texture
- Easier or har...
2022-02-18 17:32:26 +0000 UTC View Post
The photos don't do it justice, but our lenticular resin worked! We tried clear resin, blue resin, and glitter resin (above) with varying degrees of success. So excited to share this video with you tomorrow!
-Katelyn
2022-02-17 16:59:49 +0000 UTC View Post
So for the resin lenticular lens video we needed to make 3 "mold masters" to pour silicone around to create our mold. This is something we've had to do in the past and I can't help but laugh at/admire Evan's brain sometimes. For comparison, here's my version of a mold box from a past project where we tried making rainbow dif...
2022-02-14 16:38:44 +0000 UTC View Post
So we recently found out about lenticular lenses... which have a unique property that allows objects behind them to disappear (under the right circumstances). We of course want see if we can do the same thing with resin 🤣 But in our video before we try anything, we want to explain what the heck is going on and how it works. We tend to think we're pretty good makers but explaining things in a...
2022-02-10 17:30:57 +0000 UTC View Post
Hopefully this motivates us to actually organize it... This would be posted on Evan and Katelyn 2 most likely -K
2022-02-07 16:52:21 +0000 UTC View Post
Even when we have a long video there's still more to talk about! Like...
- Additional tips/thoughts on this marble technique and finishing style
- Evans near miss accident
- Was the fix/upgrade worth the effort?
- Our initial fear of doing marbled resin again
- Concerns about small scale tests in general
- Thoughts on glow in the dark powder
- How much we winged the sides
We got a preview clip from our editor (for Friday's video) and we had to share! PS we asked what the translation what and he said:
"c'est tout google translate, désolé les français" - This is all from google translate, sorry French people
"fais moi l'amour sur les toits de Paris!" - Make love to me on the rooftops of Paris! 2022-02-01 17:10:13 +0000 UTC View Post
We just realized we had not mentioned to y'all WHAT we were restoring! Oh you know, just our bedside dressers we got as a wedding present from Katelyn's granny, no pressure 😅🤣 They really DO need a little TLC though because at one point or another they were each on my side of the bed and I'm not the most gentle person at the end of the day when I'm dropping my phone, keys, etc on the tabl...
2022-01-28 21:41:14 +0000 UTC View Post
The catio got a LARGE upgrade with this new roof! We no longer have to clean it after every rain and Joob gets a nice and dry hangout space 🙌 -E
2022-01-26 18:38:36 +0000 UTC View Post