Greetings friends
I hope you all having a great summer so far, healthy with your families. I personally had a good recharge and some great family time, so now its time to get back to work! I want to thank you all for sticking around with me during the paused month and i hope to see all of you staying here for next month as well:) I already started working on some things for next mon...
2021-07-25 09:44:11 +0000 UTC View PostGreetings friends.
I have to announce you that the page will shut down for July. I really have to take some time off and have some time with my family right now and have a proper rest after a long time. I will also take the time to have another physio session to recover my wrist fully again so i return stronger than ever. So i thought it will not be fair for you to charge you and give &nb...
2021-06-26 14:52:20 +0000 UTC View Post
Greetings friends.
Thor is now available for mint condition and mint partners tiers. The files are located as usual in the Store models collection folder in Dropbox, and all the way down to Store models section in my website.
The model will also be available for purchase as well in MyMiniFactory later this afternoon for peppermint tier people that want to buy with their discount. 2021-06-26 14:51:34 +0000 UTC View Post
Greetings friends
Mimir is now available for peppermint , mint condition and mint partners tiers.
Mimir also known as the Smartest Man Alive, and nicknamed by Kratos as Head, is the Norse God of Knowledge and Wisdom and an ally of Kratos and Atreus. He was Odin's advisor and the ambassador of the Aesir Gods until Odin imprisoned him...
2021-06-20 14:00:45 +0000 UTC View Post
Greetings friends
Lord of darkness is now available for peppermint, mint condition and mint partners tiers.
Relatively easy print, you have to use little support to the ears and his glorious chin XD
2021-06-15 16:56:59 +0000 UTC
View Post
Greetings friends
Venom figure is now available for peppermint, mint condition and mint partners tiers.
The file is available as a 2 part version that is suitable for resin and a 10 part version that will make your life easier for FDM, or if you want to go much bigger either way. The 2 part version also includes a pre-supported version for the figure, but be very careful on the scal...
2021-06-10 15:17:59 +0000 UTC View Post
Greetings friends and i wish you all to have a great month
I know its been a week since the month started and i'm a little late than usual, but for a good cause :) I have been sculpting the Venom figure all week and we are now in testing phase. So i thought while you wait to cut the bust so you have something fresh to print.
So here he is!
2021-06-08 12:00:14 +0000 UTC
View Post
Greetings people and i wish you all to have a great month.
In about 3 hours i will be the guest of today's Prusalive and i would like to invite you all to watch and give me hell in the chat! XD
See you there!
Fotis
2021-06-02 15:30:54 +0000 UTC View Post
Hello again
Owl beast is now available for mint condition and mint partners tiers and you can find it in Store models collection folder in Dropbox, and to the Store models section to the website all the way to the bottom of your tier page.
This model is mostly made for resin printers and i also provide pre-supported stls that was created and tested by Joe Casa aka Breaks n' ...
2021-05-19 09:58:38 +0000 UTC View Post
Greetings friends
Predator bust is now available for peppermint, mint condition and mint partners tiers, in my website and Dropbox.
I provide two versions. One that with the full bust and a separate base, and one version with split upper teeth for easier FDM printing.
2021-05-19 09:56:10 +0000 UTC
View Post
Greetings friends
Spawn is now available for peppermint, mint condition and mint partners tiers.
Two part print as usual, but this time a part of the base is an actual part of the bust. As you can see the skull to the base is Spawn's belt. I hope you like this touch :)
Really want to thank the people in Discord for throwing Spawn as a suggestion, i had a lot of fun...
2021-05-08 14:21:29 +0000 UTC View Post
Hello again :)
Captain America bust and head is now available for peppermint , mint condition, and mint partners tiers.
This one is not gonna give you hard time at all.. little supports needed to the side of the head and the back of the helmet and buckle, but its a very small amount of supp...
2021-05-01 23:09:48 +0000 UTC View Post
Greetings friends and have a good month!
Thanos bust and head is now available for peppermint, mint condition and mint partners tiers. You can find them as usual in website and Dropbox.
The bust has two versions. A one piece version that will be good for resin, and a 2 piece version that has a split head and its easier for FDM.
2021-05-01 23:08:51 +0000 UTC
View Post
Greetings friends.
As promised Scarlet Witch is now available for peppermint, mint condition and mint partners tiers.
Very easy print, as usual in 2 parts with a separate base, can be printed without supports.
Happy printing!
Till next time
Fotis
Greetings friends
Jormungandr is now available for mint condition and mint partners tiers.
This model is suitable for resin printing but also printable for fdm users.
I provide a one piece version and also one with split head to make it easier for supports. I also provide pre-supported files (.chitu and stl) for resin printers made and tested by ...
2021-03-30 15:58:53 +0000 UTC View PostGreetings friends.
As you already know i returned this month very happy and with huge appetite to give you quality sculpts again after my 2 month pause because of my injury and i hope i succeeded. Unfortunately yesterday i started feeling pain to my wrist and elbow again so today i went to the doctor and my physiotherapist. They both suggested to do at least 2 weeks of recovery...
2021-03-25 17:56:56 +0000 UTC View Post
Hello friends
Vision's Head is now available for peppermint ,mint condition and mint partners tiers.
Many people asked and as promised i provide the head with separate mind stone and base, and also a version with the stone merged.
Like the bust, supports are similar. few to...
2021-03-20 21:33:38 +0000 UTC View Post
Greetings friends
Vision is now available for peppermint, mint condition and mint partners tiers.
A perfect bust for the people that own a resin printer but it will also print really nice on fdm as well.
Very few supports needed for the head only
I cant wait to see all your prin...
2021-03-19 09:58:11 +0000 UTC View Post
Greetings friends
An original creation this time, a Cthulhu head. Available for mint condition and mint partners tiers. The files can be found in the store models collection folder of dropbox, and in the website you have to scroll all the way down to store models section.
People from peppermint tier that dont want to upgrade and just wish to buy this model can get it in Myminifactor...
2021-03-08 12:39:48 +0000 UTC View Post
Greetings friends.
Second release of the month and this time we have another addition in the lord of the rings collection. King Aragorn is a sculpt i started late december before my wrist abandons me, and i thought it would be a shame to not finish him. So here he is!
And yes you guessed ri...
2021-03-03 15:52:43 +0000 UTC View Post
Greetings friends
First model of the month is here and its SO good to be back!
I give you a bust of Miles Morales version of spiderman from Into The Spiderverse.
Support free bust, very easy to print so i look forward to see lots of prints from all of you :)
Greetings friends
Now where do i start ...Oh yeah.
I paused this page 2 months ago to treat my wrist problem and fortunately , after tons of physiotherapy and unimaginable pain, i can now work again. The pain of course is not entirely gone and i dont think it will ever go away, but its bearable for me to start sculpting again, with therapist orders and exercises of course on a...
2021-02-22 16:18:24 +0000 UTC View PostGreetings friends.
I hope you and your families are good and healthy.
So far this month i have been doing a lot of physiotherapy and acupuncture. Huge amounts of pain going on, also making it really hard for me to sleep.. and i have to keep my hand as still as possible. Have to admit, this is a very depressing period for me not being able to sculpt at all. and i cant wait to return ...
2021-01-20 10:56:08 +0000 UTC View PostGreetings friends.
As you already know since summer i suffer from a wrist injury. Unfortunately this month the pain came to the point that i can barely sleep anymore. So next month doctor insisted to not use my hand at all and do therapy and medication again. My biggest concern during December was to deliver to you guys what was promised and fortunately i managed to do that de...
2020-12-26 16:42:57 +0000 UTC View Post
Greetings friends and Merry Christmas!
I hope you all having a wonderful family time and eating a lot :D
Frodo Baggins figure and Nazgul are now available for peppermint , mint condition and mint partners tiers.
Both models will need supports. For Frodo i have separate base and weapon versions for easier printing and of course for resin, but he will need...
2020-12-26 16:34:34 +0000 UTC View PostHello everyone!
Here are Novembers community prints.
Thank you all. You are amazing!
2020-11-28 14:20:43 +0000 UTC
View Post
Greetings everyone and wish you all to have a great November!
I want to thank all of you that stick with me during these difficult times. To the ones that left i will also give a big thank you for the support and i hope we meet again :)
The new releases are now available for peppermint , mint condition and mint partners tiers.
Lets have a look
Greetings friends
First of all i want to thank you all for helping me breaking the 400 patrons barrier this month. Its a great achievement for this page and this wouldn't have happened without your amazing support.
October had 6 releases in total. so lets have a look.
2020-10-28 13:19:39 +0000 UTC
View Post
Hello everybody
I give you the community prints of October. As always i searched discord and socials to find as many as i could. If anyone has difficulties on joining my Discord server please feel free to message me at any times so i can help you. Using the hastag #fotismint in socials would help me track them down as well.
So lets see them!
Greetings Friends
September is gone and what a cool month this was. The return after my mandatory August break brought a Tim Burton batman themed set of busts and an Archangel figure.
I want to thank everyone who stick with me after the break. It was a very tough period for me. Especially mentally. Unfortunately my wrist problem will stay with me until the docs find a way to operate...
2020-09-28 10:05:17 +0000 UTC View Post