Hi, all my patrons!
Work is still in progress.
In the last work, I felt my personal performance was a little inferior. I felt that the sculpting of the human body was a little inaccurate or did not create a pretty silhouette. I felt incomplete in everything. So this time, I want to build the foundation again with a little easier work, so I'm going to sculpt a woman wearing a dress s...
2024-09-09 13:18:54 +0000 UTC View Post
Hi, all my patrons!
Due to continuous file leakage damage, I will stop providing Dropbox links. Instead, I will speed up sharing through MMF while it will be uploaded at the same time as at the end of the month.
----------------------------------------------------------------------------------------------------------
This work is around 93mm t...
2024-09-04 07:42:24 +0000 UTC View Post
Hi, all my patrons!
Work is still in progress.
Things keep happening when it's almost over. Still, it's almost over.
First of all, the approximate placement of all three poses has been completed, and it will be finished by fine-tuning and cutting.
The skirt is a little thick, so I'm adjusting it thinly. Usually, for the stability of printing, there is a tendency to...
2024-08-29 11:26:10 +0000 UTC View Post
Hi, all my patrons!
Work is still in progress.
Before talking about the work, I think we should talk about the schedule. I think we should adjust the schedule a little conservatively.
The first pose is almost over. I think it'll be over in about a day. I have two other poses left, and I think it'll take about 5 days in total, 2.5 days each, and 1 day for each pose to cut her....
Hi, all my patrons!
Work is still in progress.
I'm struggling tremendously to adjust to the new production process. I wanted to quit in the middle of my honest feelings and run away. To explain the approximate reason, there are so many bugs in working on it that it takes a lot of time to solve it. Somehow, I'm continuing my work by reducing the use of the program.
To return t...
Hi, all my patrons!
Work is still in progress.
First of all, I picked 3 poses. I don't like them much except the first one, but I don't think it would be a bad idea if I gave her feather fans later, and get a bit more of a pose trim.
Usually, I need inspiration or inspiration to proceed quickly while working on it, but I really don't know about this one. I'm a little bit wond...
2024-08-19 11:48:59 +0000 UTC View Post
Hi, all my patrons!
Work is still in progress.
The overall parts were roughly blocked. As much as I make dancers, I plan on decorating her with various jewels.
At the same time, when I write the next report, I will do my best to post the image of her posing as well.
And there is a sale on Myminifactory. You can buy your old work cheaply, so please refer to it.
Hi, all my patrons!
I just started working on it.
This is Burlesque Dancer, and it's a request from a long-term subscriber. I think it's going to take more time than I thought because I thought I should put in pretty details.
First of all, I'm going to turn the fancy and big feather fan back to make it beautiful with a big silhouette, and I'm going to think about a few th...
2024-08-12 11:53:36 +0000 UTC View Post
Hi, all my patrons!
Due to continuous file leakage damage, I will stop providing Dropbox links. Instead, I will speed up sharing through MMF while it will be uploaded at the same time as at the end of the month.
----------------------------------------------------------------------------------------------------------
This work is around 90mm t...
2024-08-08 14:04:59 +0000 UTC View Post
Hi, all my patrons!
Work is still in progress.
First of all, I'm going to do only two variations. Cloth and Topless.
I'm working on 4 at the same time, so I have to pay attention to modularity. At the same time, I'm trying to finish it as fast as I can. My goal is to close it this week, but if I keep increasing the work, the deadline is delayed. So I turned to reducing my wor...
2024-08-05 11:16:11 +0000 UTC View Post
Hi, all my patrons!
Work is still in progress.
I'm figuring out a new program little by little. After about 50 crushes, about 80% of it worked the way I wanted it to, and I got meaningful results. However, the quality wasn't very good, so I ended up having to do more sculptures.
First of all, 4 poses were chosen, and I'm thinking of releasing them in 3 versions, but I don't k...
Hi, all my patrons!
Work is still in progress.
I'm currently adjusting to a new program. The results are not very good. I'm fighting a new program for 6 hours now. It's a bit painful. The program keeps crashing.
I'm going to make it a little bit simple to make the outfit look similar to the last quad leader, and I'm going to try this process out.
I decided on AT-4 and ...
Hi, all my patrons!
Before we start working on something new, I want to talk about a few things.
Right now, I have financial difficulties. I started with digital files and your precious subscription fees, but I've been seeing a steady decline in sales since the middle of last year. I'm holding out now because I'm doing occasional commissions with my printing business.
I don'...
Hi, all my patrons!
Due to continuous file leakage damage, I will stop providing Dropbox links. Instead, I will speed up sharing through MMF while it will be uploaded at the same time as at the end of the month.
----------------------------------------------------------------------------------------------------------
This work is around 98mm t...
2024-07-23 06:11:14 +0000 UTC View Post
Hi, all my patrons!
Work is almost done.
I decided to change the sleeve part of the arm to frill in the end. It's not pretty after making the pattern about 3 times, but rather it looks messy, so making it with frills seems consistent in the design.
There are a lot of things going on this weekend, so I'll probably finish it next Tuesday. I'm sorry to have kept you waiting too ...
Hi, all my patrons!
Work is still in progress.
I'm almost done with the dress side. I'm probably going to make and finish accessories, hats, and shoes.
The shape of the hand will be adjusted a little more. It will be able to print small.
I can't guarantee when it will be finished. But I will make it as fast and pretty as possible.
----------------------------...
Hi, all my patrons!
Work is still in progress.
It takes a long time because there are many frills, but I think it will be a pretty work, so I'm working hard on it.
If I put patterns on her dress and trim her wrinkles, I think many empty parts will be beautiful.
And I sent an email to long-term subscribers. I would appreciate it if you could check it out.
Due to ...
Hi, all my patrons!
First of all, I took a good rest for a week and came back. Honestly, I was quite busy doing other backlogs. Still, I took time out of my mind to do the next work quickly, and I was proceeding little by little.
The new work is Rococo Dress. This is a request from a long-time subscriber, and I'm trying to carve a woman who feels as elegant as possible. There's a l...
2024-07-08 11:09:49 +0000 UTC View Post
Hi, all my patrons!
Due to continuous file leakage damage, I will stop providing Dropbox links. Instead, I will speed up sharing through MMF while it will be uploaded at the same time as at the end of the month.
----------------------------------------------------------------------------------------------------------
This work is around 88mm t...
2024-07-01 09:08:23 +0000 UTC View Post
Hi, all my patrons!
Work is almost done.
I will finish it at the end of this week or early next week. I think I'll be done if I put more details on her costume a little more, and add another hair.
I'm living a little hectic these days. I've been working on outsourcing since last year, but due to circumstances, I started measuring it this May. The deadline is until November, so...
2024-06-27 13:01:26 +0000 UTC View Post
Hi, all my patrons!
The work is progressing well sequentially. It's not a very difficult task, so it's in progress quickly.
First of all, there will be two types of weapons.
Still undecided on what to do with her underwear. Or I'm thinking about launching one that doesn't have NSFW version.
I aim to finish it by the end of this month.
----------------------...
Hi, all my patrons!
I've started a new work. This topic is a Rebellious school girl.
Let's talk a little bit about this topic, it was chosen through a vote. In that research, I was inspired by the cover of Hack/Slash and tried to make it into an emo style, but I thought it was strong and not very attractive for me to make it.
So during the research, I found the image on the far ...
Hi, all my patrons!
Due to continuous file leakage damage, I will stop providing Dropbox links. Instead, I will speed up sharing through MMF while it will be uploaded at the same time as at the end of the month.
----------------------------------------------------------------------------------------------------------
This work is around 90mm t...
2024-06-18 08:29:12 +0000 UTC View Post
Hi, all my patrons!
Work is still in progress.
Maybe it can be done by the middle of next week.
Since there are clothes that are fluttering, I feel like I don't know how to cut them.
The thing that bothers me most now is sunglasses, clothes, and choker. I want to modify the design, but I'm still thinking about it.
I'm almost done with the big work, so I'll try t...
Hi, all my patrons!
Work is still in progress.
All I want is for this woman to have a leader's aura.
As a reference, the characters are produced by mixing the feelings of various characters such as Balalaika in Black Lagoon, Misato Katsuragi in Evangelion, Jill Valentine in Resident Evil, and so on.
Currently, I'm thinking about what attachment to the utility belt, and...
Hi, all my patrons!
I've started a new work. This topic is a woman with a double pistol.
The reason for producing this theme is that I want to make a skirmish miniature game later.
Finally, the goal is to produce five women of the same faction. And with other themes, I also aim to produce four factions of five women. One of the most likely faction is Japan-themed faction, ev...
2024-06-06 01:42:54 +0000 UTC View Post
Hi, all my patrons!
Due to continuous file leakage damage, I will stop providing Dropbox links. Instead, I will speed up sharing through MMF while it will be uploaded at the same time as at the end of the month.
----------------------------------------------------------------------------------------------------------
This work is around 93mm t...
2024-06-04 12:15:19 +0000 UTC View Post
Hi, all my patrons!
Work is going fast. There will be a total of six versions. I have to go to Japan this weekend to see my newly born nephew. It will be done by the middle or the end of next week. I don't think I'll have much to say next Monday.
----------------------------------------------------------------------------------------------------------
Thank y...
2024-05-30 06:39:45 +0000 UTC View Post
Hi, all my patrons!
I've started a new work. This is a request from a long-term subscriber, and a request to produce a one-piece racing swimsuit.
I'm planning to make clothes other than one-piece, and this time, I'm working on it with great care on the human body. I am busy with my schedule this week, so I will finish it sometime next week.
--------------------------...
Hi, all my patrons!
Due to continuous file leakage damage, I will stop providing Dropbox links. Instead, I will speed up sharing through MMF while it will be uploaded at the same time as at the end of the month.
----------------------------------------------------------------------------------------------------------
This work is around 66mm t...
2024-05-23 09:06:44 +0000 UTC View Post