Skeletor's staff
work in progress
no textering yet and i am still roughing out shapes
I am designing this as if I have been asked to make a prop for a he-man movie
This will be life size and built around a pvc pipe for strength and printed many parts.
this will be out closer to the end of the month
one with fins attached
one with print separate fins
I am also trying make sure all parts are already oriented better too
2022-03-05 21:13:15 +0000 UTC View Post
If you did not get it check your spam. And if you still did not get it. Make sure your payment went thew!
2022-03-04 01:59:01 +0000 UTC View Post
Hi all!
So we just ended February, it was a busy short month. We had some good designs and some that just did not hit(sorry about that). And my Thingiverse link got taken down in less than 12 hours by a mean person (who I will not name here). All this being said we did not grow as fast as we normally do, but that's ok.
We have a lot of cool things for March and a way to earn free P...
Which starter should I do next
PS
Ornamental magikarp is still coming out this in the next 7 days, I just wanted to get Fuecoco out while it was still hot.
2022-03-02 20:19:55 +0000 UTC View Post
I only used cubes to make him. I am working on a full brake down.
2022-03-02 17:22:56 +0000 UTC View Post
He is ready to use Splash
I have 2 sizes. All files are oriented well for fdm and Resin(Other than the base for resin angle that at 45 angle).
for FDM
Use a skirt and print slow.
This will be out tomorrow guys sorry, I really want to make sure the base can print into parts to allow Magikarp to be bigger when printing. So I have a little bit of tweaking left to do
2022-03-01 02:47:24 +0000 UTC View Post
Here is a little tease of clean Magikarp, it should be out tomorrow or Tuesday.
2022-02-28 02:18:00 +0000 UTC View Post
I am removing the Benchy as an option when you sign up. It was there mainly for when all of my designs were on Thingiverse. So if you have the level of bency, congratulations you are now being treated as if you are a Leveled Bed. But if you leave you will have to join as a level bed.
2022-02-23 03:36:04 +0000 UTC View Post
After needing more speed to defeat Knuckles, Sonic sought help from the only person that might be faster than him, Barry Allen. Now with access to the Speed Force, Sonic is ready to take on!
The Pre-Supported files are not what I used to test print. I had no issues but that might not be the same for you.
For FDM 4 walls!!!!
.12 Layer height
Tree Supports
<...
This is the FDM version I am still testing the resin version.
Edit I tweaked the head to neck connection
Go forth and post pics all over facebook of you new articulated Rayquazas
edit
no supports, i built any supports you might need right into the file.
I have tested this on .2 and .16 and both worked fine. I would up your wall though just to give it some st...
I can bring you in warm or cold. But I am going to catch them all!
The base is designed to be printed without supports. I will be releasing it later in the week for any pokemon.
What should I release to thingiverse, comment below! Anything from my patreon is on the table people https://www.filamentsfolly.art/
2022-02-14 22:43:27 +0000 UTC View Post
Working on something for Monday or Tuesday
2022-02-13 20:23:56 +0000 UTC View Post
You wanted it and now its here!
edit added the files
I thought you guys might find this useful.
2022-02-12 21:25:43 +0000 UTC View Post
Come and watch me sculpt the Ornamental Eevee live tonight over on twitch.
https://www.twitch.tv/psdwizzard/
He is done! I know that Eevee has a special place in a lot our hearts, and I wanted to make sure that this sculpt earned that place. I know this one has been teased for a week or so. And that is because I resculpted it 3 times. I wanted it to be perfect. He has a nice flat bottom too for easy printing.
Now onto the ornamental version!
Support - Yes
as requested a full set with no ESRB
2022-02-08 13:05:58 +0000 UTC View Post
I still need to tweek it, and I need to fix the ears but its getting closer. I am hoping to have the test prints dont tomorrow and a release wednesday or thursday
2022-02-08 01:38:37 +0000 UTC View Post
Instructions
I messed up i grabbed the wrong file for the body its fixed now
FDM
Use a lower percentage infill on the hearts
I suggest
15 for the body
5 for the heart
Resin
I would hollow it out and angle the body back
I would also keep the body hollow 2 times thicker than the heart
Please let me know if there are any issues with this I am using MailChimp so I am hoping it won't go to spam. But if you don't see it and should have it check your spam. If its not there please contact me!
2022-02-04 01:23:50 +0000 UTC View PostMy power has completely failed at my house due to weather. I'm hoping that the power company here can give me an ETA soon. I know some things are supposed to go out today like the Dropbox links and some files and this may be delayed. I'm really sorry about this I wish there was something I could do.
We are fine here just waiting for the power to come back on.
