Castle Dice Tower (Cobblestone)
Added 2023-06-19 14:28:31 +0000 UTCIntroducing our innovative and user-friendly 3D-printable dice tower, designed to revolutionize your gaming experience! This cutting-edge design is specifically engineered to be effortlessly 3D printed without the need for any additional support structures, ensuring a hassle-free and efficient printing process.
The sleek and elegant design of this dice tower adds a touch of sophistication to any gaming table. Its clean lines and refined contours create a visually striking centerpiece that enhances the overall ambiance of your gaming sessions. The thoughtfully engineered structure ensures a consistent and controlled dice roll, preventing undesirable outcomes such as dice bouncing off the table or falling off the edges.
The user-friendly nature of this design extends beyond the printing process. Assembling this dice tower is a breeze, with interlocking parts seamlessly fitting together, requiring no additional tools or adhesives. This ensures that even beginners in the world of 3D printing can effortlessly create their own high-quality dice towers!
Elevate your gaming experience to new heights with the MysticMesh3D castle dice tower, where craftsmanship meets functionality, and every roll is an adventure!
Comments
how small can you scale this before it won't work anymore?
Roll4Stealth
2024-05-24 00:24:36 +0000 UTChave any recommendations on how to print this? number of walls? infill? does it work with lower infill?
Roll4Stealth
2024-05-24 00:20:51 +0000 UTCwhat printer were you using and what settings did you use?
Roll4Stealth
2024-05-24 00:19:40 +0000 UTCthe only difference between the 3 is the dice tray portion?
Roll4Stealth
2024-05-24 00:18:33 +0000 UTCHaving issues with the cobblestone gate, it fails over 90% of the time at basically the same spot about 92% done with the print. Its just completing the wall, looking at one I finally got to complete, and the fails I got I'm wondering if there isn't a small shift in the STL around 32mm up from the base. or if anyone else had this issue? I've tried multiple filaments, slices, still having the same problem.
Audrey Silver
2024-05-05 13:45:02 +0000 UTCTook it down to 65%. Should handle a normal six sided die. Average D20s wont fit.
Medic105
2024-03-24 15:52:36 +0000 UTCJust printed mine. Took 9hrs, but it's amazing
Alex Rogers
2024-02-15 17:07:51 +0000 UTCHas anyone tried scaling this down? I'm wondering how small it can go, I want to make it small enough to fit inside the box with a board game which would require a max height of 10cm
Nathan Mcateer
2024-01-09 20:27:57 +0000 UTC10% works just fine!
Matthew Moscato
2023-11-16 04:23:14 +0000 UTCWhat infill do you recommend?
Angelcia Magaña
2023-11-16 03:56:10 +0000 UTCNo supports required to print! I don't print mine with supports and the tower in the photo was printed without any supports. If you're having overhang issues with your printer you can try reducing layer height. You can always try tree supports if needed, but I've printed this tower without supports on Bambu Lab X1C, Bambu Lab P1S, and Ender 3 S1 Pro without any issues.
Matthew Moscato
2023-08-22 14:43:12 +0000 UTCI have Problems to Print the tower becase of the overhang. Do you print this with supports ?? Or do you have any ideas to solve this ??? Thx in Advance
TM 3D Design
2023-08-22 11:55:17 +0000 UTCAll depends on what I’m printing. I used 0.2mm layer height for these.
Matthew Moscato
2023-06-20 17:02:29 +0000 UTCwhat layer height do you use for your prints
BanditCrusader
2023-06-20 17:01:41 +0000 UTCChatGPT is an amazing tool 👍
Matthew Moscato
2023-06-20 00:25:33 +0000 UTCChat GPT rules the world.
Nathan Penney
2023-06-20 00:24:06 +0000 UTC
