Nintendo Switch Game Holder Attachment (100% Scale Mini Crate)
Added 2023-07-17 16:57:31 +0000 UTCNintendo Switch game holder attachment for the 100% scale mini crate!
Features:
24x Nintendo Switch Game slots
1x Stylus slot
The MM3D Mini Crate is a compact storage solution that offers a stylish and functional way to organize and store your small items.
The Mini Crate's versatile size makes it perfect for storing an array of small items. Whether you need to keep your collection of craft supplies, electronic components, jewelry, or any other tiny treasures organized, this crate has got you covered. With its well-thought-out dimensions, it easily fits on shelves, desks, or countertops, optimizing your space utilization.
Printing the Mini Crate is a breeze as it has been designed specifically to be printed without the need for additional supports. Simply load the 3D printable file into your preferred software and start the printing process. Thanks to its clever engineering, you can enjoy a seamless and hassle-free printing experience, allowing you to bring your storage solution to life in no time!
Comments
I have printed it thing 3 times and every time the right side looks like something had ate it the rest looks fine any ideas
Travis Feltner
2024-03-26 10:12:49 +0000 UTCThe OLED model is larger, this is designed for the regular switch
Matthew Moscato
2023-08-15 21:05:29 +0000 UTCDoes the Oled model fit in this?
Josh Costin
2023-08-15 20:35:54 +0000 UTCHere are 5 tips that can help reduce stringing on 3D prints: - Increase retraction distance/speed - Reduce printing temperature - Adjust the print speed depending on your printer - Clean hotend/nozzle - Keep filaments moisture free
Matthew Moscato
2023-07-31 00:01:38 +0000 UTCi have attempted to print 2-3 of each size, just curious if anyone is having stringing issues? everything else I print is fine.
Scott Teitge
2023-07-30 23:58:46 +0000 UTCI use about 10% infill for the attachments
Matthew Moscato
2023-07-30 16:22:01 +0000 UTCHiee! Question, what are your infill recommendations for the inserts.
Vee
2023-07-30 16:15:03 +0000 UTCLove this print. Would you be able to do some custom switch holders?
Johnathan McClure
2023-07-19 15:33:05 +0000 UTCYou can always use supports if needed, but they’re not required as long as everything with your printer is fine. All of the videos posted on the 3DPF social media channels printing these are using a 0.4mm nozzle on an X1C using the standard 0.2mm layer height profile. This product photo on this listing was printed without supports using those same settings
Matthew Moscato
2023-07-19 00:18:19 +0000 UTCStruggling with overhangs on this printing with bamboo using standard profile. Bridging rather.
Matthew Shaw
2023-07-19 00:15:55 +0000 UTCYeah the Kobra 2 has auto z offset. Maybe i will bring it up a tiny bit. I figured it was a machine defect as yours go right in.
Joshua postl
2023-07-18 14:20:00 +0000 UTCThey don’t need to be resized, if your printers are calibrated properly they will slide right in. If your nozzle is too close to the build plate or e-steps aren’t calibrated properly it may print with too much filament squish that will result in a tighter fit. If you are still experiencing a tight fit after releveling and re-calibrating e-steps, try scaling the insert to 99% and this will account for any imperfections during the printing process
Matthew Moscato
2023-07-18 14:10:02 +0000 UTCLike 99% to fit the 100% crate?
Joshua postl
2023-07-18 14:05:34 +0000 UTCI have printed two of these and the other inserts and they wont fit. I have tried all three sizes. Printed on an ender neo max and a Kobra 2 printer. Do i need to go down to 1% lower to make them fit?
Joshua postl
2023-07-18 14:05:10 +0000 UTC
