Fusion360 Lesson: Designing a Threaded Container
Added 2023-10-06 19:48:55 +0000 UTCIn this lesson you'll learn how to design a threaded container in fusion360!
Comments
More of this stuff please! And thank you!
Kirt Dickinson
2024-02-23 11:21:05 +0000 UTCThank you!
The Nerd Farm
2023-10-16 22:41:16 +0000 UTCAny chance you’ll do one of these on how you did the collapsable sword?
PNWPrintedIdeas
2023-10-16 03:46:36 +0000 UTCAwesome, thank you. These lessons are brilliant for me
Daniel Chapman
2023-10-15 16:54:29 +0000 UTCFusion 360 Is available free for hobbyists and non-commercial
Kyle Rogers
2023-10-11 00:32:10 +0000 UTCWhen come the next Video 🙂
Daniel Baumeister
2023-10-09 20:17:55 +0000 UTCIs fudion free or is it priced reallu high?
Joshua
2023-10-09 19:34:46 +0000 UTC🤯 I’ve had fusion for 3 months and this is the best tutorial I’ve seen. Most of them are so long and just ramble. You were straight to the point and now I’m off for a 2 hour print. Thank you!
MrsEllison
2023-10-08 18:02:49 +0000 UTCAbsolutely incredible of you to do this, thank you!
Mike Wardlow
2023-10-08 01:57:22 +0000 UTCThis is awesome! thank you so much for posting this! Made it so much easier to learn the software!
Terry F.
2023-10-08 01:15:58 +0000 UTCthis is amazing thanks for this
deborah colon
2023-10-07 11:57:55 +0000 UTCWoohoo first design done. Thanks :)
Casey B
2023-10-07 06:34:07 +0000 UTCThank you for the lessons! you should consider 3d design classes maybe? Best.
Nicolás Gallego
2023-10-07 00:51:16 +0000 UTCthank you! this was super helpful and just the kind of content i need, i have been wanting to get more into fusion360 and this is perfect!
quest21woodshop
2023-10-06 22:57:05 +0000 UTCThanks just finished tinkercad course and needed my next step software and it looks like I found it. A starter course would be good also
Simon Woodley
2023-10-06 22:51:21 +0000 UTCTo follow along with this lesson simply open fusion360 to a fresh work plane and you’re good to go 👍
Matthew Moscato
2023-10-06 22:08:33 +0000 UTCI printed this container at 10% infill and on a bambu lab P1S. Bambu lab printers can print much faster than a prusa Mk3S, so that would be the main reason for the 3x faster print time.
Matthew Moscato
2023-10-06 21:57:15 +0000 UTCThis is awesome. Thank you! Out of curiosity, what percentage Infill did you use on this print? Your time showed around 2 hours and mine is showing around 6 hours. That seems like quite a difference. I'm on a Prusa MK3S but didn't think it would be THAT much of a difference from the Bambu. So my guess is maybe infill? My infill setting is just at a default 15% but I'm still not familiar enough to know how much is too much/not enough.
Patrick Meledeo
2023-10-06 21:52:46 +0000 UTCTy
jason martinez
2023-10-06 21:45:49 +0000 UTCI just joined a few days ago! This is a great add to the sub! I've never used F360. Do we just use the default settings/preferences to be able to follow along?
Lyra Lopez
2023-10-06 21:05:30 +0000 UTCI was busy in Fusion to make a threaded "container" so it helped me a lot tbh :)
3DPrintalot
2023-10-06 20:37:30 +0000 UTCYes! I love this!
Josh Costin
2023-10-06 20:32:34 +0000 UTCThis was very clear and easy to follow, thanks!
3DPrintalot
2023-10-06 20:29:59 +0000 UTCAs you can tell we all love this!! Thanks !!!
Daniel Dockstader
2023-10-06 20:22:22 +0000 UTCThank you!
Gainz
2023-10-06 20:17:48 +0000 UTCyes!!!!!!!!!!!!!!
Connor sawaya
2023-10-06 20:07:42 +0000 UTCPlease more of this! You are awesome!
Chad Shirey
2023-10-06 20:07:16 +0000 UTCAwesome!! Thanks bro 🙏🏼🙏🏼
Javier verduzco santana
2023-10-06 19:53:44 +0000 UTCI love you!!!!!! Thank you sm!
joshua jordan
2023-10-06 19:50:00 +0000 UTCThanks for taking your time to do this appreciate it.
Abel
2023-10-06 19:49:51 +0000 UTCYessss more of these please!
ItsEggo
2023-10-06 19:49:48 +0000 UTC
