Vampire Queen ($10 tier)

@Mika - I don't wanna be rude but if you are into 3D printing, yet you refuse to use a slicer like Cura, then how do you print anything? Do you use a different slicer? Vae has shared their Cura settings and even supplies the file tilted exactly like he printed it... I think that is more than enough. Sure, Vae can share the final .gcode file but there are SO many variables with FDM printing: How dialed in is your machine, ambient temperature, filament type, extruder wear and tear, etc. I understand wanting things to be plug-n-play but 3D printers aren't microwaves yet and you have to do SOME work.

Nick Porterfield

For resin that won't work, supports are totally different! For FDM, yeaah maybe, but settings can vary so much from one to another, I fear it could create more issues than solving them :/ Worth a try though, with a disclaimer!!

And yes its not a big deal, but if you already test and have good settings, would be just a few clicks more and you could share the file with the supports. Even better customer experience 😉

Mika Mannonen

For resin users? Or FDM users?

No, I mean supported FDM file. You already share cura settings. You could slice the model with cura and export the stl and share it.

Mika Mannonen

I see many people printing it without issues with supports in resin, so shouldn't be hard! Check out Greg Kourakos videos on youtube if you don't know it already!

I don't print in resin, so I don't have any pre-supported files to give!

I dont and wont use cura, so I could just print the sliced .stl :)

Mika Mannonen

would be great if you would give out the presupported files also. The ones you use for testprints

Mika Mannonen

We'll do 2 max per months! Maybe later we'll be able to offer pre-supported, but not yet as we don't have a resin printer yet! It's something we asked the Patrons a few months ago, supporless vs non supportless. So many people printing in resin with supports, doing only supportless greaty reduce the posing possibilities :/ I think 2/3 of them being supportless is a good middleground. And we are trying to have the others easy to print! From what I know, pruso autosupports works great!

Thanks a lot!! Really appreciated :D

I hope we don't loose supportless, thats 100% the reason I am here at the merchant tier..... I don't mind one, maybe two as long as there is only a little support needed...., but 80% or more I hope will remain supportless.

Silverbeam Creations

I've had to cull some patronages of late, as with work drying up, things are getting a bit tight. But, these gothic characters are just too amazing to pass up. I'm back onboard! Would love to see more gothic/vampire stuff - can't wait to see what the terrain is going to be....

Bigus Chrisus

She'll be available through April and May, no worries :D (we might change our way of doing after may, and month will stay only 1 month, but not for now!!)

Works nicely yes! Bug I'm having some Zbanding recently I think, need to investigate :D

That's a good print too. Your settings must be well dialed in.

Pablo Ortega

Oh man! She looks absolutely vicious. You throw this down on the table and players are going to run. With your love of Strahd, I knew you were gonna knock gothic out of the park!

Nick Porterfield