[Archived] RubiKuro and Egg

Hiiiii!!!!

I am sooo excited to share this newly hatched dragon with you!! With a little help from my test team I named her RubiKuro which translates to Ruby Claw!

This release includes:

🐉 RubiKuro dragon
🐉 2 Prepainted RubiKuro 3MF files
🐉 Rubi Egg

RubiKuro was tested down to as little as 50%, however I dont recommend going below 60% scale. Prints without supports. The large gradient Rubi in the pictures is approx 135% scale. I recommend using minimum 3 walls, and if you sometimes have adhesion issues I recommend using a brim with a brim gap between 0.3-0.6 mm, especially when printing in multicolor.

Egg

I have heard and took into consideration the concerns that were brought to my attention with Kaida's egg. I have made a few changes to this egg design, the egg is wider at the base which allows a dragon to fit much more comfortably! I have also made the tabs on the top a bit shorter to allow for easier opening and closing. Having a looser fitting top introduces a chance of the top coming off when shaking the egg upside down hard enough, it should however stay closed when flipped upside down, and with regular use. The Egg and Rubi are 1:1 scale, this means that 100% Rubi will fit into 100% egg. Egg prints without supports.

If you are using Bambu slicer I recommend using Arachne for your wall generator, this will ensure that there is an even number of walls on the egg.

When placing Rubi into the egg: It doesn't particularly matter which end you place in first, as long as you coil her up, then place the top over in line with the tabs and give a gentle shake, the top should snap in place easily. You can also place Rubi into the top of the egg, and bring the top down into the bottom. I have made a short clip of how to place Rubi into her egg, linked below

Youtube short

Filaments used:

Blue and Pink Rubi: Polymaker PLA Ice, Ziro Matte Pink, Polylite PLA Pro Metallic Magenta, Ziro PLA pro Snow white

Black, blue, red Rubi:  Ziro Gradient Twinkling PLA, Cookiecad Pale Blue Elixir PLA, Cookiecad Ruby Red Elixir PLA, Cookiecad Sloar Flare PLA.

Grey and pink Rubi: Polyterra PLA Fossil Grey, Cookiecad Pixie Dust PLA, Hatchbox sparkling grey.

Yellow pink gradient Rubi: Ziro Matte gradient sunlit Petal, Polylite PLA Starlight Mercury.

Large gradient Rubi: Eryone Matte Marcron Rainbow

I think that's all! If you have any questions please let me know!! 

----------------------

This design has been Archived. If you were subscribed the month which this design was released then it will be free to download from your My mini factory account.

If not then it is available to purchase from the below links. Patreon License still applies to designs purchased separately. Make sure to use the discount code listed in the download post 

Cults3D

My Mini Factory

🤍🤍🤍