![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/6/kp/az/ee0934-019e8263-362d-7cfc-a606-84bc3d273c4c.png)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/1/ga/cg/ee0934-019e8263-363b-7910-a69b-6f8a2739b2f1.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/6/xw/oq/ee0934-019e8263-3649-7961-b182-30518f538561.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/7/ir/qo/ee0934-019e8263-3651-7c50-b8ea-3e05225c1ac4.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/6/rn/tk/ee0934-019e8263-3657-7db9-982d-99a53f29af1a.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/3/nj/zw/ee0934-019e8263-365b-7616-8886-799b30801bcb.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/3/fg/mr/ee0934-019e8263-365f-7b4b-8968-8d7514899e56.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/11/qw/pn/ee0934-019e8263-3670-7726-8f2e-f64cc4652ef4.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/1/yn/em/ee0934-019e8263-3688-74c7-900a-da0215db56b4.jpg)
![[Archived] Yeti Flexi and Mountain Shelf](https://img5.samuzai.com/storage/5/gh/qn/ee0934-019e8263-368c-7464-8816-d98a68d3fb90.jpg)
[Archived] Yeti Flexi and Mountain Shelf
Added 2024-11-13 21:44:11 +0000 UTCHiii!!
Its Yeti Day!!! Yaay!!! Everything that is included in this release:
❄️ Yeti Flexi and Keychain
❄️ Prepainted 3MF
❄️ Mountain Shelf (2 parts)
Yeti flexi was tested down to 80%, I would not go smaller than that because the legs start to catch at lower scales. I don't recommend scaling the keychain version down at all as its already scaled down.
In the 3MF the regular sized yeti is split to parts, while the keychain version is not.
Please make sure that when you are editing the 3MF of the regular yeti that you are NOT painting the eyes, mouth, and foot pads with the paint tool. They are split to parts and painting them will create uneven paint lines. Instead please assign color to them from object list located in the left side panel.
The shelf/stand prints in two parts, the peaks print separately and should be glued onto the tops. It can be used as a stand, or hung on the wall using two nails at the peaks. 100% shelf fits 100% yeti.
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
Filaments used:
White Yeti: Polyterra Cotton white, Polyterra Pastel Ice, Ziro Twilight matte Gradient
Rainbow Yeti: Eryone Matte Rainbow, Ziro Starry Sky, Polyterra Army Beige
Blue Yeti: Cookiecad Blue Omber, hand painted accents.
This design has been Archived. If you were subscribed the month which this design was released then it will be free to download from your My mini factory account.
If not then it is available to purchase from the below links. Patreon License still applies to designs purchased separately. Make sure to use the discount code listed in the download post
Comments
hii!! sure!!
Christine
2025-03-18 00:27:03 +0000 UTCCan we add different holes to the Yeti or different size keychains/attachments? I wasn’t sure the license restrictions.
BlueByLiquid
2025-03-18 00:05:42 +0000 UTCAww that’s so awesome!!
Christine
2025-01-01 20:33:14 +0000 UTCHii!! Follow the links at the bottom of the post 🥰
Christine
2025-01-01 20:33:02 +0000 UTChello where can i get this print since it is archived
MissMaddyCakes
2025-01-01 19:42:51 +0000 UTCI gifted one to my sons 5th grade teacher. She loved it so much, it’s been named Blizz & turned into the “elf on the shelf” for her classroom. Seriously, I love your designs!
J Armstrong
2024-12-05 19:26:38 +0000 UTCJust emailed you back 🥰
Christine
2024-12-02 20:10:13 +0000 UTCI am having the same issue.
Brianna McCollum
2024-12-02 19:16:35 +0000 UTCme and my daughter just love these. can not wait to get printing. thank you
Zoe Howson
2024-11-28 09:20:51 +0000 UTCEmail sent :)
Leah
2024-11-27 02:32:55 +0000 UTCWill do! Thank you 🥰
Leah
2024-11-27 02:29:10 +0000 UTCI’m not totally sure what you mean by layering? You can send me pictures of your fails to help troubleshoot on instagram, facebook, discord, or email them to me at thesprouted@gmail.com 🥰
Christine
2024-11-27 02:28:12 +0000 UTCNo it’s a layering issue. We’ve tried recalibrating the machine
Leah
2024-11-27 02:26:40 +0000 UTCHii!! Is it adhesion issues with the arms?
Christine
2024-11-27 02:25:36 +0000 UTCAbsolutely love this print! I’m having issues with the arm when printing. We tried three time and no luck 🥲
Leah
2024-11-27 02:21:00 +0000 UTCI made him!!! Into earrings!
Yoriko Rayne
2024-11-25 13:56:12 +0000 UTCThank you so much!!! I really appreciate that ❤️🥰
Christine
2024-11-24 15:08:37 +0000 UTCNew subscriber here... i just wanted to compliment your whole (ridiculously talented and much appreciated) portfolio!!! Thought I'd share that this print is what convinced me to subscribe... great job!!
Beth C. Yacoub
2024-11-24 07:01:28 +0000 UTCOh Shoot. I was hoping to make it giant for my wife.
BlueByLiquid
2024-11-21 06:45:32 +0000 UTCThank you! This one isn’t split up to separate objects
Christine
2024-11-21 06:31:35 +0000 UTCIt seems like it was made that way so I am hopeful
BlueByLiquid
2024-11-21 06:30:53 +0000 UTCThis is the best design ever! Do you have a version were the horns, face and toes are their own object?
BlueByLiquid
2024-11-21 06:30:29 +0000 UTCHiii! I don’t share printing settings because they can widely vary between different prints and slicers. The general settings I recommend are 3 walls, and I use 15% 3D honeycomb infill slicing in bambu studios 🥰
Christine
2024-11-18 14:37:12 +0000 UTCcan you please tell me the printing data infill and print mode ? thank you
Petra Schneller
2024-11-18 14:29:27 +0000 UTCIt’s the grey part in the ziro twilight matte gradient
Christine
2024-11-16 22:59:08 +0000 UTCSorry i’m not totally sure what you mean, is it on the painted file? like the hand pads? You can send me a picture on instagram, or facebook, or discord if you’ve joined it
Christine
2024-11-16 22:58:04 +0000 UTCsupper cute but is there a way to get rid of the line in the back happens with all off them just after it has completed the arms and bottom half. can see it in the front but very noticeable in the back
Bec Gault
2024-11-16 21:58:58 +0000 UTCI used PolyTerra Fossil Grey. It came out super cute.
JABTDesign
2024-11-16 20:54:53 +0000 UTCHey! For the regular yeti version I’m not seeing the color for the gray you use for the horns and face. What is it?
alex
2024-11-16 20:28:44 +0000 UTCAwesome thank you 🤩
Willowbubbles
2024-11-15 19:44:20 +0000 UTCHiii!! I don’t offer print parameters because they will widely vary between preference, slicers, and the type of filaments used. The basic settings I recommend would be 3 walls, and i personally use 15% 3d honeycomb infill if your using bambu slicer 🥰
Christine
2024-11-15 19:43:47 +0000 UTCHello brand new subscriber here, I saw this and just had to! Quick question could you advise the print parameters please? Thank you ☺️
Willowbubbles
2024-11-15 18:47:35 +0000 UTCi love him and have already printed 2 variations! <3 Could we get a non-horn version to turn him into a sasquatch? i think big foot would look better with no horns (but is basically the same)
Julie Pehotsky
2024-11-15 04:51:00 +0000 UTCLove how these look with the Arctic Whisper filament from Bambu
Tim Jacobs
2024-11-15 04:32:46 +0000 UTCnot usually. i do a snap test before I load everything bc some of my older colors are brittle from not using fast enough. the polyterra had just been opened from delivery so it was definitely dry. my prints are smooth when it isn't clogging the extruder. a mystery for another day 😆
Whimsy and Wonder Boutique- Hannah Wilson
2024-11-15 04:05:28 +0000 UTCDo you usually need to dry filament? Matte filament can become tricky to print with if it’s wet. I keep my filament in a small closet with a dehumidifier in it which solves all of my wet filament issues
Christine
2024-11-15 03:13:49 +0000 UTCIt’s mostly up to your printer, scaling up means bigger overhangs, 120% should be pretty safe!
Christine
2024-11-15 03:05:52 +0000 UTCI figured that might be the case. I will love him how he is. Is there a limit of how big we should make him
Justine Taylor
2024-11-14 20:46:57 +0000 UTCI saw that you used Polyterra. My question is- how do i get my Polyterra to stop clogging during print? I was shipped Polyterra by accident and didn't return it because I will use them on DIY paint models. BUT even in Polyterra filament setting in Bambu slicer- it clogs. I wonder if the temp changes between the filaments messes with the printing too much because they require different temps? Not sure. But if anyone has a suggestion.... I have 2 full rolls of Polyterra I need to print through but it seems like my only option is to print just polyterra only? There's gotta be something that I'm missing!
Whimsy and Wonder Boutique- Hannah Wilson
2024-11-14 20:34:45 +0000 UTCI wish he could stand too, I spend a full day trying to figure out a way to make him do both but I wasn’t able to figure it out unfortunately
Christine
2024-11-14 19:28:24 +0000 UTCI love him soo much! And I hate to say it but any way that there could be a future version where he stands? I don’t know how the file could be changed. And I have a feeling I suggesting a huge ask and it’s not simple at all. I would just love to have one standing beside a sitting one. But also I’m totally happy with what we got and your design and it’s seriously the best one I’ve seen. Please don’t think I’m complaining. I just thought he’d be able to stand. Like even a version that’s not articulated like Santa. And I get it people ask for more both ways. People wanted Santa to articulate and not be sold.
Justine Taylor
2024-11-14 19:02:45 +0000 UTCI love him so much! I'm so excited to make this set!!
Gothic_Wolfielia
2024-11-14 18:15:23 +0000 UTCI would love a less horny version! I wear size 18 shoes and Bigfoot is my spirit animal!
Kevin Young
2024-11-14 18:12:36 +0000 UTCon print right now! I'm doing a good in the dark body in blue, but appears white. and then acid blue silk for the face and feet. and of course the mountain!!
Whimsy and Wonder Boutique- Hannah Wilson
2024-11-14 15:50:55 +0000 UTCI LOVE THESE!!! and now I know what I'm making for everyone at the company Holiday party this year!
Thea UrsaLunar
2024-11-14 14:56:08 +0000 UTCI love this so much. I can't wait to make many yeti cuties!!!
Rachel
2024-11-14 12:04:32 +0000 UTCCute little monster 😍
Sieglinde Schafzahl
2024-11-14 04:26:22 +0000 UTCI’m obsessed! I have a plate of these printing now, can’t wait!
Cynthia Rosado
2024-11-14 02:50:06 +0000 UTChehehe
Christine
2024-11-14 00:33:03 +0000 UTCThank you so much 🥹❤️ that means the world to me!!
Christine
2024-11-14 00:32:28 +0000 UTCHii!! Welcome!!
Christine
2024-11-14 00:27:11 +0000 UTCnew subscriber here!! can't wait to print
Author Mona Storm
2024-11-13 22:52:57 +0000 UTCSoooo excited to try this with my pastel rainbow PLA! TYSM!
Printcess Pixel
2024-11-13 22:51:04 +0000 UTCSo cute! The shelf is the perfect added touch. 🙂
Carey (and Jack) Parkin
2024-11-13 22:48:21 +0000 UTCSooo Adorable! I love him and the shelf just makes it even better 🥰 You've really been hitting your stride this year and knocking it out the park. I can't thank you enough for all of the well thought-out ideas, attention to detail and hard work you put into each piece. I feel as if I've watched you grow over this last year both with confidence and in design and with that you've also helped my business grow. I appreciate you dearly. Thankyou for being you ❤️
Lisa
2024-11-13 22:32:17 +0000 UTCOHMYGOSHOHMYGOSHOHMYGOSH
Ben - FlexiPals
2024-11-13 22:25:23 +0000 UTCSo adorable!!! Thanks for the keychain version! Love love love it!!!
Iryna
2024-11-13 22:15:34 +0000 UTCthe little yeti booty is adorable lol
PJ Baltzor
2024-11-13 22:07:02 +0000 UTCYou better believe we're slicing.
Richard HANNIGAN
2024-11-13 22:02:34 +0000 UTCso awesome! thank youuu
SerialKreations
2024-11-13 22:02:03 +0000 UTCyay!! I have them going, 9 full sized and then 6 minis. I can't wait!
Justine Taylor
2024-11-13 21:59:55 +0000 UTCEek the shelf! I love that you make display stuff for all your designs 😍
LauraCampy
2024-11-13 21:59:38 +0000 UTCSo cute!
Rosieco
2024-11-13 21:57:54 +0000 UTCOMG this is my new (and instant) favorite
Amanda ~ MakoByte Innovations
2024-11-13 21:51:24 +0000 UTCmy printer is almost done with my last print so its time to get this cutie going!
PJ Baltzor
2024-11-13 21:51:09 +0000 UTCsheeeeeeelf!!!
poppilabs
2024-11-13 21:47:32 +0000 UTCAhhh the SHELF!
Cat Rees
2024-11-13 21:47:23 +0000 UTCAW! That is just so adorable!
Olivi Pemberton
2024-11-13 21:47:22 +0000 UTCThe shelf is perfect!!!!
Julie Fernandes
2024-11-13 21:46:32 +0000 UTCin love!
Daisy
2024-11-13 21:45:57 +0000 UTCOh goodness this is ADORABLE!
Kendra
2024-11-13 21:45:34 +0000 UTC
