Full Scale Domes - Higher Rez
Added 2018-01-21 13:48:05 +0000 UTCYou're looking at the mesh for the full scale domes for all you lunatics who want to print a full scale dome in a single print. I've added a couple more following the MightJabba's first test print which had noticeable "facets". They're in the custom folder in the Patreon share, Dome, DomeHR and DomeHR2, with HR2 being the highest rez. You can see the density in the pic, the darker one is the highest rez.
Comments
Thank Michael. Will download and print it out. Will let you know how it goes👍🏻
Wayne Vyner
2018-05-13 22:30:36 +0000 UTCOk, in Patreon folder with the R2 dome. I’ve fixed the dome now and added a retrofit ring. (Obviously not test printed it but should work.)
Michael Baddeley
2018-05-13 13:52:12 +0000 UTCThanks Mate. Much appreciated .
Wayne Vyner
2018-05-13 10:01:17 +0000 UTCMight get chance later today. I’ll message you.
Michael Baddeley
2018-05-13 09:59:39 +0000 UTCa retrofitted plate to glue on would be great. At the moment there's not really that much to glue to as it sit slighty over the ridge of the neck ring. How long would it be before you made it available mate?
Wayne Vyner
2018-05-13 09:51:35 +0000 UTCGood question, at this stage it’s welded or glued on. This was the first test dome so I will add the bolt plate back in. (I could do a retrofit plate to glue onto the dome rather than directly glue the ring on.
Michael Baddeley
2018-05-13 09:40:00 +0000 UTCQuick question. How does the one piece dome fit onto the coloured ring. Doesn’t have the wide base with the bolt holes like the multi piece version.
Wayne Vyner
2018-05-13 08:49:32 +0000 UTCIt’s in the custom folder on the Patreon share.
Michael Baddeley
2018-03-13 02:23:23 +0000 UTCfiles?
2018-03-13 02:21:25 +0000 UTCAh OK, there’s a custom folder in both the open share (link on the info page, and the Patreon Share, I’ll pm you the Patreon Share, the files are in there).
Michael Baddeley
2018-03-01 06:08:37 +0000 UTCfor the high resolution full scale one piece r2 domes
2018-02-28 23:19:37 +0000 UTCWhich files specifically? The custom folder is just for requested custom work so there’s not much in there?
Michael Baddeley
2018-02-28 19:07:54 +0000 UTCthe stl's seem to be missing out of the custom folder now. can you post a link to them?
2018-02-28 18:33:21 +0000 UTCCR-10 S5
Peter Richards
2018-02-24 06:56:10 +0000 UTCI used the CR-10 S5
2018-02-18 23:42:35 +0000 UTCWhat printer do You use to print it ?
2018-02-14 10:10:14 +0000 UTCMichael, which other parts do you think would benefit from being printed as a single piece for those of us with larger printers? The single piece dome is *so* much less work to finish, and you gain some space too.
Peter Richards
2018-02-13 01:11:04 +0000 UTC
