R4 Jig for Styrene builds (Will be releasing the printed R4 dome though).
Added 2018-02-09 16:09:00 +0000 UTCI've done a R4 Jig for the curved pieces on the dome if you're doing a styrene version.... I've done two versions, one with holes for vac forming. Suggest PETG as PLA won't hold up under the heat. I've added marking / cut slits so you can oversize, shape and then mark / cut. It's made for 2mm Styrene (can do other versions if needed but 2mm should work). Prints in 3 pieces for a 200x200 print bed and bolts together with 4mm bolts. May be useful to grab a copy of the files for building the dome? https://1drv.ms/f/s!AjIlFUf9uEzogf0ukiH_2kbeSUhmDA
This is a direct link, but it's in the open share anyhow....
Happy printing,
Mike,
Comments
I’ll cut it this week (remind me).
Michael Baddeley
2018-02-12 06:45:12 +0000 UTCAll was well until I went to pint part 2. It is just too big for my printer. :(
2018-02-12 06:44:23 +0000 UTCHow about a reverse data panel door to start with? IE a negative buck in the form of the data panel door. So a rectangle that has a depression of the data panel door. maybe 1 inch tall or what ever that is in mm.
2018-02-09 22:08:04 +0000 UTCLol, ask and I’ll see what I can do :-)
Michael Baddeley
2018-02-09 20:19:33 +0000 UTCWe can make requests?? Hey now, I have a few. :)
2018-02-09 19:18:01 +0000 UTCNope, this was a request from someone building at the moment.
Michael Baddeley
2018-02-09 19:08:04 +0000 UTCHave you done other 3D printed bucks before?
2018-02-09 19:07:21 +0000 UTCNot tested them, so let me know your thoughts.
Michael Baddeley
2018-02-09 19:02:57 +0000 UTC
