It does take a while :-)
Added 2018-03-20 19:05:10 +0000 UTCWe're on creating a few thing at the moment. Firstly the R4 Dome, this takes a little longer as I am videoing each part to share the Fusion 360 hints / tips and to get people designing. Secondly I'm finishing off the dome collection (R4 is certainly one along with R7 dome which is underway). The R9 dome is complete and I love it!!! So much so, that I'm printing a 3rd Astromech body for it, a custom paint job. Lastly (and most exciting) is the 2-3-2 modules. I've printed a few test pieces to make sure the concept works... Watch this space. Also I'll be sharing the Fusion 360 designs for the Data Port and Charging Port for those wanting to customise them. All the Fusion designs and videos are available to dedicated Patreons ($5 and above), all models are freely and openly shared as always!!!!
Happy printing, designing and building..
Mike,
Comments
Of course, feel free :-)
Michael Baddeley
2018-03-31 03:26:21 +0000 UTCHi Michael. Wow this is great. I had a similar design idea for my Chopper build using a belt with the motor off to the side, but this planetary idea is so much cooler! Do you mind if I borrow from it a bit for my Chopper build?
PatchBOTS
2018-03-30 23:25:38 +0000 UTCI'm amazed that you get so many designs out as quickly as you do! A quick question, is the one-piece body on your radar at all, or it is something that is many months away or just a potential future project? There is plenty of other parts to keep my printers busy but I'm keen to tackle a one-piece body.
Peter Richards
2018-03-20 21:42:50 +0000 UTC
