Centre module first fit
Added 2018-05-15 05:29:40 +0000 UTCI’ve fitted the centre lift module to the main frame. Really wanted to test the strength of the lift frame. Fit is good, want to reduce the size a little bit and strengthen a tweak but overall it’s coming along. it’s going to be a big job as I said before, as this part is critical. I will release other stuff in between as this takes shape.
Happy Printing,
Mike,
Comments
Were can I get STL file for r2d2
2018-06-24 02:32:43 +0000 UTCHi Ray, still looking, I am tweaking the design to reduce the size a little more. Current thinking is using a brushless outrunner as I need torque, speed and power in a small package. I’ll need to have some reduced gearing also I think to drive it and reasonable control. Encoder with end stops maybe one option or variable resister on an arm (like a big servo).
Michael Baddeley
2018-06-11 03:25:41 +0000 UTCDid you settle on what motor your going to use for this?
Ray Edgley
2018-06-10 22:47:49 +0000 UTCThanks for the link.
Timothy Hebel
2018-05-19 14:45:47 +0000 UTCThey look perfect!! I’ve gotta get some of those.
Michael Baddeley
2018-05-18 23:11:40 +0000 UTCThese type of batteries are easy to find a home for. <a href="https://hobbyking.com/en_us/multistar-high-capacity-20000mah-4s-10c-multi-rotor-lipo-pack-w-xt90.html" rel="nofollow noopener" target="_blank">https://hobbyking.com/en_us/multistar-high-capacity-20000mah-4s-10c-multi-rotor-lipo-pack-w-xt90.html</a>
Peter Richards
2018-05-18 21:12:57 +0000 UTCBatteries are always a challenge with 2-3-2. SLAs are extremely difficult to fit, however a couple of LIPOS can be slotted in pouches around the side. Was also looking at the battery boxes and a ‘skirt drawer’. All possible.
Michael Baddeley
2018-05-16 15:42:52 +0000 UTCIn this design, where do put the batteries?
Timothy Hebel
2018-05-16 11:54:54 +0000 UTCIt looks like R2 is about to drill for oil.
Peter Richards
2018-05-15 05:46:06 +0000 UTC
